FOR AUDI A1 2.0 TDI FRONT CROSS DRILLED PERFORMANCE BRAKE DISCS 310mm

Manufacturer Part Number Does Not Apply
Brand Kinetix
Placement on Vehicle Front~Left~Right
Coated Yes
Note To Buyers Please Leave REG | VIN Number After Purchase
Diameter [mm] 310mm

BEFORE PURCHASING YOU MUST CONTACT US CONFRIMING YOUR VEHICLE DATA THIS CAN BE DONE BY USING THE TWO OPTIONS BELOW.


OPTION 1:

FOR UK REGISTERED VEHICLES ONLY WE NEED THE UK REG.


OPTION 2:

FOR NONE UK REGISTERED VEHICLES ONLY YOU MUST PROVIDE THE FULL CHASSIS / VIN NUMBER.

THIS IS A MUST AND IS NEEDED SO THAT WE CAN CHECK FITMENT

WITHOUT THIS INFORMATION WE WILL NOT SHIP ANYTHING

THIS WILL ALSO AVOID ANY DISAPPOINTMENT OF RECEIVING INCORRECT PARTS.

eBay Item Number: 395317920532

FOR AUDI A1 2.0 TDI FRONT CROSS DRILLED PERFORMANCE BRAKE DISCS 310mm Front Brake Disc Setup: Brake Disc Type: Vented | High Carbon | Anti Corrosion Coated Brake disc Diameter: 310mm Brake Disc Thickness: 25mm Brake Disc Minimum Thickness: 22mm Centering Diameter: 65mm Overall Height: 34mm Drilled Only: Brake gas build up is a major problem when braking at high speeds which effectively causes brake fade. The drilled disc surface on the kinetix brake discs dissipate heat more effectively by breaking down surface gases more efficiently. The holes are laser drilled through the discs which reduce brake mass. The drilled brake discs also benefit from keeping braking temperatures rapidly low which helps keep the pad surface from reaching high temperatures that can be caused ...
FOR AUDI A1 2.0 TDI FRONT CROSS DRILLED PERFORMANCE BRAKE DISCS 310mm
 
Front Brake Disc Setup:
Brake Disc Type: Vented | High Carbon | Anti Corrosion Coated
Brake disc Diameter: 310mm
Brake Disc Thickness: 25mm
Brake Disc Minimum Thickness: 22mm
Centering Diameter: 65mm
Overall Height: 34mm

Drilled Only:
Brake gas build up is a major problem when braking at high speeds which effectively causes brake fade. The drilled disc surface on the kinetix brake discs dissipate heat more effectively by breaking down surface gases more efficiently. The holes are laser drilled through the discs which reduce brake mass. The drilled brake discs also benefit from keeping braking temperatures rapidly low which helps keep the pad surface from reaching high temperatures that can be caused from hot surface gasses.


Fits:

Audi A1 (8X1 8XK) 2.0 TDI
2011-2015

Audi A1 (8XA 8XF) 2.0 TDI
2011-2015


Must Read Before You Buy:
BEFORE PURCHASING WE RECOMMEND CONTACTING US WITH YOUR REG NUMBER or VIN NUMBER SO WE CAN CHECK FITMENT.


BEFORE PURCHASING YOU MUST CONTACT US CONFRIMING YOUR VEHICLE DATA THIS CAN BE DONE BY USING THE TWO OPTIONS BELOW.


OPTION 1:

FOR UK REGISTERED VEHICLES ONLY WE NEED THE UK REG.


OPTION 2:

FOR NONE UK REGISTERED VEHICLES ONLY YOU MUST PROVIDE THE FULL CHASSIS / VIN NUMBER.

THIS IS A MUST AND IS NEEDED SO THAT WE CAN CHECK FITMENT

WITHOUT THIS INFORMATION WE WILL NOT SHIP ANYTHING

THIS WILL ALSO AVOID ANY DISAPPOINTMENT OF RECEIVING INCORRECT PARTS.

We make every effort to deliver goods within the estimated timescale. However delays are occasionally inevitable due to unforeseen circumstances.


We recommend you do not book your vehicle in for any repairs until you physically have the part to save on any disappointment caused by delays.


AZCARPARTSUK will be under no liability for any costs on damages or expenses caused by any delays.


Delivery times are working days which exclude weekends and public holidays. 


Please enquire before purchasing if you are in a matter of urgency to discuss an express delivery option.


Areas where additional charges apply are listed below:

The following Postcode will incur additional surcharge costs. AB31 TO AB56, ON, BT, GY, HS, IM, IV, JE, KW, PA20 TO PA78 AND ON.., PH, PO, ZE as well as any OFF SHORE ISLANDS

We accept PayPal, Credit & Debit Card payments for all orders placed.


For your security and convenience we only accept payments via PayPal with a confirmed address. We do ask that all payments are made immediately to avoid delays in dispatching your order.


1. Always contact us first.


2. We cannot process a return if you do not email us.


3. We can only accept returns if they are either genuinely faulty or in pristine condition (have not been fitted and in original unmarked packaging).


4. The buyer pays for returns postage


5. 30 Day's return period

Welcome to AZCARPARTSUK home of low-cost online car parts we are a family owned business and have been trading in the car parts industry since the early 1980's.


Our knowledge , experience and expertise in car parts reflects on our staff and company we have achieved a great deal in just over 20 years of trading.Authorised Distributors of: Febi bilstein | Dunlop | ZF Sachs Boge | Textar | Brembo | Mahle | Elring | Victor Reinz | TRW | Apec | Mintex | Delphi justto name just a few...


We ship worldwide and have a customer base across 52+ different countries.This is down to our offerings of quality parts and impeccable service.


Our Opening Times Are

Monday - Friday : 10am - 4pm

Saturday: 10am - 2pm

Bank holidays: Closed

eBay Item Number: 395317920532

FOR AUDI A1 2.0 TDI FRONT CROSS DRILLED PERFORMANCE BRAKE DISCS 310mm Front Brake Disc Setup: Brake Disc Type: Vented | High Carbon | Anti Corrosion Coated Brake disc Diameter: 310mm Brake Disc Thickness: 25mm Brake Disc Minimum Thickness: 22mm Centering Diameter: 65mm Overall Height: 34mm Drilled Only: Brake gas build up is a major problem when braking at high speeds which effectively causes brake fade. The drilled disc surface on the kinetix brake discs dissipate heat more effectively by breaking down surface gases more efficiently. The holes are laser drilled through the discs which reduce brake mass. The drilled brake discs also benefit from keeping braking temperatures rapidly low which helps keep the pad surface from reaching high temperatures that can be caused ...