Commercial Induction Cooktop Lower Power Even Heating Hot Plate 3500W / 220V Single-phase Abangdun

HAS 220V 5-20P PLUG (see pics.).

3500 W / 220V~240V Commercial Induction Cooktop

Commercial Induction Cooktop

Equipped with the latest industrial induction technology

  • Intertek Report No: 220816086GZU-001.
  • Amfori ID: 156-040948-000.
  • How to distinguish between the first generation or second generation technology Equipped with induction cooktop?
  • The first generation technology is a good solution for fast heating at high power, but does not control the power (temperature) well when working at low power. It generally behaves as intermittent work in low power Levels.( Work for 5 seconds and then stop working for 5 seconds, cyclic operation).Because its minimum power is actually 1500W,so not evenly heated.
  • The second generation of core technology upgraded induction cooktop can not only heat up quickly when working in high grade. Can also work in low power (temperature) Levels normal continuity, because the technology can do the lowest power 400W, both fast heating, also insulation. More energy efficient!

Ultra-thin induction cooker

3500W/220V Commercial Induction Cookter

3500W/220V commercial induction hot plate

  • This induction cooktop with power levels: 400W, 600W, 800W, 1000W, 1200W, 1400W, 1600W, 1800W, 2000W, 2200W, 2400W, 2600W, 2800W, 3000W, 3200W, 3400W, 3500W.
  • Temperature from 176°F(80°C) to 464°F( 240°C) Can achieve very good energy saving and heat preservation effect.
  • With timing function, convenient for unattended
  • Ultra-thin design saves space, thickened stainless steel plate, stronger load-bearing capacity, integrated forming work surface, easy to clean.
  • E0: Line fault
  • E1:No pans or pans material is not suitable.(Please place the pots before turning on the induction cooktop.)
  • E2:Voltage is too low
  • E3: Voltage is too high
  • E4:Sensor failure
  • E5: Thermistor failure
  • E8:Temperature of the coil is too high
  • E9:Temperature of the IGBT is too high

Large Coil

Large diameter copper coil

  • Pure copper wire winding coil disk, heating area is large and uniform, effectively reduce the ambient temperature inside the induction cooker, greatly increase the service life!
  • Many users mistakenly take the size of the panel black crystal glass as the size of the heating area, which is not correct.
  • The size of the diameter of the coil directly determines the size of the heat generating area. Black crystal glass panel is only a safety accessory used to insulate.

Induction cooker requirements for cookware

Induction cooker requirements for cookware

The most suitable pot size is about 12 inches

  • Cookware less than 9.25" diameter cannot work at full power.
  • The most suitable pot size is about 12 inches.
  • The maximum pot size that the induction cooker can hold is about 16 inches.
  • Minimum cookware size is 6 inches.

Industrial induction stoves

Commercial Grade Countertop Burner 3500 W /220V-240V

Warning

  • Please use in 220V~240V voltage.
  • Please do not strike the glass ceramic with sharp objects. When cracks appear in the microcry stalline plate, please cut off the power immediately.
  • Please do not place metal objects on this induction heating countertop.
  • Please use a flat iron pan, put the pan on and start the switch.
  • Please do not block the air inlet at the bottom of the induction cooktop and the air outlet at the top.
  • It will automatically shut downWhen the induction cooker works for 2 hours without being operated.
  • Please do not cut off the power after you finishing the cooking work in 2 minutes, because the cooling fan is still working.
  • Please keep the induction cooker clean, do not allow cockroaches to enter inside the induction cooker, do not put the induction cooker into water to clean.

Scene Show

FHA-HoReCa 2022

Power cord parameters

Guangzhou Autumn Import and Export Trade Fair

Singapore International Restaurant & Hotel & Baking Exhibition

The new technology of the second generation of induction hobs attracted a large number of overseas customers at the exhibition.

Power cord parameters

Power cord parameters show

Global Import and Export Fair Exhibitors

We are a professional research and development, manufacturing and sales in one enterprise, for many customers and cross-border e-commerce OEM, quality won the praise at home and abroad!