● Locater Core Tool

● Male Cap kit :1 Metal Housing+ 4 Retentive caps (Extra Soft + Soft + Standard + Lab Use)

● Locater Core Tool & Male Caps KIT

● NP 3mm Abutment & Male Caps KIT

● NP 4mm Abutment & Male Caps KIT

● NP 5mm Abutment & Male Caps KIT

● RP 3mm Abutment & Male Caps KIT

● RP 4mm Abutment & Male Caps KIT

● RP 5mm Abutment & Male Caps KIT

● Implant System Compatible With:  NOBEL Biocare NobelActive Conical  

 

● NP Ø3.5mm Narrow Platform

● RP Ø4.3mm Regular Platform

 

● 3.0mm, 4.0mm, 5.0mm

● Yellow Xtra-Soft Retentive Cap(0.8 lbs) 1Pcs

● Blue Strong Retentive Cap (1.2 lbs) 1Pcs

● Pink Strong Retentive Cap (2.4 lbs) 1Pcs

● Metal Housing Laboratory Processing Cap 1Pcs

● Block-Out Spacer 1Pcs

 

● The male removal tip has a

pointy end useful for gripping

and removing the retainers of the

metal caps incorporated in the

overdenture.

 

● The central part of the Locater

core tool, once detached from the

tip, has a cylindrical end specially

designed for inserting the retainers

in the metal caps.

 

● This end of the Locater core tool,

acts as a driver for carrying the

locater abutment into the oral

cavity and as a hand driver for

fixing it to the implant.

 

● The 3 Components of the Locater Core Tool

● About The Locater Core Tool and How to Use It

● Locater 3-IN-1 Core Tool

 

● The Removal Tool Tip is used to engage and remove the Male from the Denture Cap.

● The Seating Tool is used to seat the Locater Male.

● The Anchor Driver with the Abutment Holder Sleeve carries the Abutment securely and places it onto the implant.

● Very Easy to Use. Follow these steps to utilize the 3-in-1 Locater Core Tool:

 

● Loosen the Removal End of the Core Tool. You will see a visible gap between the removal tool and seating tool.

● Insert the Removal Tool Tip into the Denture Assembly and push straight into the Male. Tilt the tool so that the sharp edge of the tip will grip the Male and pull it out of the Denture Cap.

● Once the Male is removed proceed to point the tool down and away from you. Tighten the Removal Tool Clockwise back onto the Core Tool. This will disengage the Male from the tip of the Removal Tool

● Separate the Removal Tool part of the Locater Core Tool. Use the Seating Tool to place a new Male into the empty Denture Cap