![](https://aluckddy.guphotos.com/images/uploads/aluckddy_topbanner.gif)
![](https://ainagrd.guphotos.com/images/uploads/ainagrd_descriptions.gif)
Features:
Professional Gelcoat Sprayer --- for spraying coat into open molds. Used for spraying -coat and resin. Special design achieve faster than conventional .
Easy --- Come with 500cc wash bottle, cleaning in just a few minutes. Which is labor saving and money saving then other Sprayer.
Ergonomic Design --- The body adopt adopt alloy with cup, the spayer with handheld size and weight, perfectly in your hand and without fatigue for long spayer.
Premium Qality --- Sprayer body made of alloy with -rust coating with nozzle which is and longevity. cup easy clear and wear resist.
Wide Application --- This set is a profesional sprayer for gelcoat and resins, but also a paint sprayer for other materials such as parting films, gypsum, tooling gelcoats. Which is a for every fiberglass shop.
Specifications:
Material: Alloy +
Product name: coat
Feed type:
Working pressure: 60-100 PSI
Nozzle size: 5.0mm
hose connection: 1/4 inch
hose connection: 3/8 inch
Product Application: for spraying coat, epoxy coat
Item Size: 26*25*12cm/10.2*9.8*4.7in
Item Weight: 1420g/50.1oz
Package Weight: 1500g/52.9oz
Package Size: 26*25*13cm/10.2*9.8*5.1in
Package List: E10599
1 * Trigger
1 * Control Valves
1 * Housings
1 * Spring Hooks
1 * Nozzle (5mm)
2 * 1000ml Cups
1 * Metal Lid
1 * 500cc Wash Bottle
How to use:( compressor is no less than 5KG)
1 Preparation:
According to coat viscosity, the appropriate nozzle diameter (nozzle type for selection 1-8 ( small to large, please buy seperat).
2 :
Cover the lid on the cup filled with materials, and pressed the lid.
The jet nozzle is inserted into the mouth of the before the injection port until the nozzle is exposed.
Hold the grip, hold back the bolt, the ejected from the jet port.
Note 1: In performing the above , the nozzle should be to the nozzle leakage of material, will pour under the , ejected material, adjust the control , the material to achieve the atomization, the muzzle aligned mold surface can be production.
Suggestion: When spraying, tips and the mold surface into a 90 -degree angle.
Note 2: In the injection process, remember not to point the nozzle themselves and others, in order to accidental injury, when you stop spraying, will .
When you release the bolt, so the material out of the with a cleaning solution, tips, feeding cups washed, coated with oil, to prepare for the use.