1600W MPPT Wind Solar Hybrid Boost Charge Controller for 12V 24V Wind Turbine
Product introduction:
This kind of wind solar hybrid street light controller is a special design for small off-grid devices where wind generators and solar panels charge batteries safely and efficiently.
Functions:
** Wind generator MPPT boost charging function.
** Wind PWM dump load, external dump load resistor, intelligent solar charge separation.
** Dual power supply function: battery + solar power supply.
** LCD displays parameters such as voltage and current of wind, sun and load. Some parameters can be set by the user.
** DC output with 3 output modes.
** The inner circuit board of the controller is sprayed with protective paint to prevent dust, moisture and static electricity.
Features:
** Wind MPPT charging method, ensure the power get max input into the battery and high charging efficiency.
** Can be used for 1000W wind turbines with high compatibility.
** Independent Boost Circuit: The charging efficiency of the low-power vertical wind generator has been solved.
** 12V/24V system auto-detect function.
** Mini size, easy to install.
** LCD display with visible and intuitive parameters.
** Rated wind power: 100-1000W
** PV Rated Power: 100-600W
Package list:
1 * Wind&Solar hybrid charge controller with dunpload
Thank you for purchasing our products. This manual is intended for people who need to install and operate the controller. Read this manual before doing any work on the controller and keep it in a safe place. The content of this manual is regularly updated or revised as necessary. However, deviations cannot be ruled out. Please refer to the actual product(s).
General Safety Information:
** Before you receive the product, please check it carefully. Make sure the product has not been damaged in transit. If it is damaged, contact the carrier or our company immediately.
** All installation and electrical work may only be carried out by qualified personnel.
** Do not disassemble or attempt to repair the controller without professional guidance.
** Do not use the controller without batteries.
** Do not disconnect the controller and batteries when the controller works normally.
** Keep children away from the controls.
** Do not allow water to get into the controller.
** Ensure power connections are tight to avoid excessive heating from a loose connection. Make sure the cables are appropriate for the system.
This kind of wind solar hybrid street light controller is a special design for small off-grid devices where wind generators and solar panels charge batteries safely and efficiently.
Functions:
** Wind generator MPPT boost charging function.
** Wind PWM dump load, external dump load resistor, intelligent solar charge separation.
** Dual power supply function: battery + solar power supply.
** LCD displays parameters such as voltage and current of wind, sun and load. Some parameters can be set by the user.
** DC output with 3 output modes.
** The inner circuit board of the controller is sprayed with protective paint to prevent dust, moisture and static electricity.
Features:
** Wind MPPT charging method, ensure the power get max input into the battery and high charging efficiency.
** Can be used for 1000W wind turbines with high compatibility.
** Independent Boost Circuit: The charging efficiency of the low-power vertical wind generator has been solved.
** 12V/24V system auto-detect function.
** Mini size, easy to install.
** LCD display with visible and intuitive parameters.
** Rated wind power: 100-1000W
** PV Rated Power: 100-600W
Package list:
1 * Wind&Solar hybrid charge controller with dunpload
Thank you for purchasing our products. This manual is intended for people who need to install and operate the controller. Read this manual before doing any work on the controller and keep it in a safe place. The content of this manual is regularly updated or revised as necessary. However, deviations cannot be ruled out. Please refer to the actual product(s).
General Safety Information:
** Before you receive the product, please check it carefully. Make sure the product has not been damaged in transit. If it is damaged, contact the carrier or our company immediately.
** All installation and electrical work may only be carried out by qualified personnel.
** Do not disassemble or attempt to repair the controller without professional guidance.
** Do not use the controller without batteries.
** Do not disconnect the controller and batteries when the controller works normally.
** Keep children away from the controls.
** Do not allow water to get into the controller.
** Ensure power connections are tight to avoid excessive heating from a loose connection. Make sure the cables are appropriate for the system.
