M.2 M-key To M.2 WiFi key E SSD Riser Card Adapter M2 key M To Mini-pcie mPCIe PCIe 4.0x1 Wireless Network Card Extension Cable
Brand: BGNing
Product model: R46SF 4.0 (180 degree connector)/R45SF 4.0 (180 degree connector) /R45SL 4.0 (90 degree connector)
product name:
R46SF--M.2 key M to mini-pcie cable
R45SF 4.0; R45SL 4.0 ---M.2 key M to M.2 key E cable
Wire length: 3-100cm (support wire length customization, if you need other lengths, please contact us to change the price, thank you!)
Speed bandwidth: PCIe 3.0/4.0x1
Product Features:
R46SF--Connect to the M.2 NVMe key M hard disk interface of the motherboard through the mini-pcie wireless network card extension cable.
R45SF 4.0; R45SL 4.0 ---Connect to the M.2 NVMe key M hard disk interface of the motherboard through the M.2 WiFi key E wireless network card extension cable.
Purchase restriction: only designated by professional engineers for purchase, general purpose is not suitable and cannot be used, ordinary buyers do not purchase.
Procurement Tips: Be sure to buy 1~2 samples first, and then buy them in bulk after testing and verifying that they are correct.
Friendly reminder: There are many compatibility problems with this product. Incorrect assembly or improper operation will burn your equipment. Only designated by professional engineers to purchase. This product is a customized product and is not refundable or exchangeable. Please consider and confirm clearly before placing an order.
Length description: The length of the wire refers to the part of the wire, excluding the PCB and the connector.
Product advantages:
1. Cable advantage, using high-speed cables, supports PCIe 3.0 full-speed stable transmission.
2. The cable length advantage can be customized from 3 cm to 1 meter. The cable impedance of this patch cord is low, and the cable length within 60 cm supports PCIe4.0 full speed.
3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.
4. The product is made of high-quality materials, the PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content of the gold finger is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance. Stable at full speed, no speed reduction required, and no compatibility issues.
5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm at the metal welding point, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.
6. The PCB is designed with short and fattening, which will not get stuck on the graphics card. The fattening and long design makes the board easier to install and reduces the chance of damage.
