5/7 Port USB 3.0 PCI-E Expansion Card USB3.0 Hub Controller PCI Express Adapter Card 5Gbps with 19pin 4PIN SATA Power Connector
Product Specifications.
Compliant with PCI-Express specification version 2.0
Compliant with USB 3.0 SuperSpeed specification version 1.0
Compliant with xHCI specification version 1.0
Host chip: uPD720201+GL35XX chipset
Maximum transfer rate up to 5Gbps, much higher than USB2.0 transfer rate: 480Mb/s, up to 10 times higher.
Downward compatible with USB2.0, USB1.1, USB1.0
Transfer rate: 5000/480/12/1.5Mbps
USB power output: up to 5V 2A (increased current type)
Built-in large 4PIN enhanced power supply interface
Support USB hot plug and play function
Support Windows XP/2003 / Vista/win7/win8/2003/10 or above system etc.
Product advantages.
A: Adopt USB3.0 main control chip + GL main control, better performance of dual core.
B: Support LINUX system.
C: No need to plug SATA or external large 4PIN interface can work.
D: The expansion card uses 7 high-performance solid-state capacitors, which greatly ensures the stability of the USB power supply.
E: Because this card is a rear 5 port, it is already too high, so it does not support small cases.
Product use:
After plugging in this adapter card on a motherboard with a PCI-E slot and installing the driver, expand 7xUSB3.0 (5 on the baffle + 2 on the front 19PIN expandable) ports! It is possible to copy data to each other with 7xUSB3.0 devices!
Hardware requirements.
A motherboard that supports PCI-E .
Note: This product is a desktop PCI-E expansion card, you need a free PCI-E slot on the motherboard to install and use, but also to confirm whether the slot is blocked by the graphics card. can not be installed and used on the PCI slot, do not plug into the PCI slot.
Packing list.
USB3.0 expansion card*1