4V -60V High-Power MOS FET Drive Switch Module Board PWM Adjustable
Features: The module supports high-level low-level switch control, PWM control
signal source: level (DC3.0V-24V), low level 0.0V-0.6V), switch value control, can be connected to MCU IO port, PLC interface, power supply, etc;Can be connected to PWM signal, signal frequency 0-2.5KHZ perfect support.
Output capacity: 4V-40V, continuous current 10A at room temperature, power 400W! Under the condition- of auxiliary heat dissipation, the current can reach 15A.
Application: The output end can control high-power equipment, motor, light bulb, LED light motor, micro water pump, solenoid etc., and can input PWM to control motor speed, light brightness, etc.
Service life: unlimited switching; Working temperature: -40-85 ℃

Specifications: Working voltage: 4V-60V
Level DC3.0V-24V; Low Level 0.0V-0.6V
Size:approx 48x34mm/1.89x1.34in
Output Capacity: 4V-40V, C
Continuous current 10A Power 400W

Package Includes: 1PC MOS Switch Drive Module

note: 1. Only one signal can control the module at the same time, and two or more signals cannot be used to control the module at the same time;
2. High-level voltage range: DC3.0V~24V, that is, when the signal is 3.0V~24V, the MOS tube is on, lower than 0.6V, that is, 0V~0.6V, the MOS tube is and the signal voltage must not be between 0.6V and 3.0V, so that the MOS is not fully open, and the MOS is burned by high-power use; 3. Low level voltage range: 0V~0.6V, that is, when the signal voltage is 0V~0.6V, the MOS tube is on, when the signal voltage is higher than 3.0V, the MOS tube is and the signal voltage must not be between 0.6V and 3.0V, so the MOS is not fully open, and the MOS will be burned by high-power use.