20Pcs Deep Groove Ball Bearing 698-2RS Double Sealed 8mm ID 19mm OD 6mm Thick
NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
- Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
- Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
- With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance.
- Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements.
- Single-row, pre-lubricated, normal accuracy.
Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:
Model: 698-2RS
Sealed Type: Double Sealed
Material:High-Carbon Steel
Heat Treatment: Quenching
Hardness: HRC50-55
Cage Material: Stamping Steel
Inner Diameter (d): 8mm
Outer Diameter (D): 19mm
Thickness (B): 6mm
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 20 Pcs
Weight: 141g
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
20Pcs Deep Groove Ball Bearing 698-2RS Double Sealed 8mm ID 19mm OD 6mm Thick
NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
- Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
- Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
- With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance.
- Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements.
- Single-row, pre-lubricated, normal accuracy.
Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:
Model: 698-2RS
Sealed Type: Double Sealed
Material:High-Carbon Steel
Heat Treatment: Quenching
Hardness: HRC50-55
Cage Material: Stamping Steel
Inner Diameter (d): 8mm
Outer Diameter (D): 19mm
Thickness (B): 6mm
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 20 Pcs
Weight: 141g
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.