When do U need relearn tool?

1.New TPMS sensors installed, letting air out or adding air in to the tire couldn’t make the system recognize new sensors.

2.Do tire rotation, didn’t have a quick and easy way to let ECU relearn new tire information.

3.When tire pressure indicator light ON, after the maintenance performed, the tire pressure needs to be reset to turn off the TPMS light.

4.Low tire pressure or leakage /replacement or installation of tire pressure monitoring equipment / tire replacement, sensor damage, etc. 

After those problems solved, TPMS needs to be reset.

5.Exchanging the winter tires or Summer tires.

1. Make the gear in P position.

2. Use cruise to choose TPMS re-learn mode in the dashboard settings.

3. Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully entered. (If equipped, the message 

center will display the front left (LF) tire)

4. Before tire pressure monitoring system works normally properly, the body control module will record ID information of each position in 

the tire pressure sensor.

Step 1—Set the car into TPMS re-learn mode. (Car will horn twice)

Step 2—Start from left-front tire, hold unit next to Valve and Press White Button, the horn bleeps once.

Step 3—Follow this order to reset TPMS one by one: front-right, rear-right, rear-left tires.

*After all sensors reset, the car horns twice means TPMS re-learn finished.

Please Kindly Note:

The package does not include the charger and battery

Package List:

1 x EL50448