YOU ARE BUYING: Unika Mitre Bond Superglue 50g & Activator Aerosol 200ml Bonding Kit Fast&Free

• Mitrebond is quick and clean and sets in 15 seconds
• No mixing or heating
• Use one or two drops per joint a 50g bottle is sufficient for 100 cornice joints.
• As you only use a small amount the result is a very clean and tight joint every time.
• Apply to: MDF, Timber, Glass, Ceramics, Aluminium, Chipboard, Perspex, Steel, Porcelain, Some Plastics
• Use on: Cornice & Profile Mitre Joints, Melamine end strips, door trims, picture frames, mdf, skirting joints etc.

• MitreBond cornice & profile rapid adhesive system is a quick and strong system for joining cornice, pelmet and plinth.
• 50g adhesive and 200ml aerosol activator pack is the most popular size with all kitchen fitters.
• Mitrebond is quick and clean and sets in 15 seconds meeding no mixing or heating.
• Use one or two drops per joint, a 50g bottle is sufficient for 100 cornice joints. As you only use a small amount the result is a very clean and tight joint every time.
• Suitable for use on MDF, Timber, Glass, Ceramics, Aluminium, Chipboard, Perspex, Steel, Porcelain & some plastics.
• Ideal for Cornice & Profile Mitre Joints, Melamine end strips, door trims, picture frames, mdf, skirting joints etc.

Directions for use:

Ensure both surfaces to be joined are clean cut and free from oil or grease.

Apply MitreBond adhesive (or any other superglue) to one side of the joint.

Apply aerosol activator to the other side of the joint.

Quickly bring the two sides into line and firmly press together, hold for 10 seconds.

Thank you for shopping with Prestigelighting