Model 1 48V 2.2KW

1.Features

(1) Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor

(2) A muffler works for the motor to decrease the noise.

(3) Omni-directional rotary joystick

(4) Anti-winding function when Increase the thickening of the propeller

(5) Aluminum alloy suspension bracket: 90° rotatable bracket, more stable and durable.

(6) Easy to install, the motor can be mounted on board without any tools

Be as one with the silent world with this Genuine outboard motor. With huge thrust, a super-strong shaft and speed control, it will put the bait just where it needs to be without the fish ever knowing you're there.

With super-low power consumption, the Genuine gets the most out of your 48V battery. Suitable for small water crafts such as inflatable boats, canoes and aluminum fishing boats. Simply twist the handle and sneak up on the fish at the optimal speed.

2. Specifications

Brand：HANGKAI

Model：48V

Rated power (W)：2200

Starting system：Switch knob added

Motor type：Brushless motor

Rated voltage (V)：48

Rated speed (r/min)：3000

Rated current (A)：50

Control system：Tiller control

Manipulation mode

Rod length (cm)：91

G.W./N.W.(kgs)：17/14

Total height (cm)：132

Transom plate height (mm)：381 ~ 508

Battery model recommendation：

Recommended battery model: one 48v battery/4 12v battery , you can buy it at a local store that sells batteries
Customer Note: This product does not include batteries and chargers

3. Application area

Used in fishing, aquaculture, outdoor adventure, etc

  Model 2 60V 2.2KW

 Description

Do you want a motor that is quiet and has strong power? Do you want a motor that can handle most water situations? If so, make sure you don’t miss our motor! Our outboard motor provides strong power of 10hp and runs quietly. It doesn’t frighten the fish and you can have a better fishing experience. It can also be used on modern kayaks and canoes.

Key Features

Pure Copper Core Brushless Motor: The pure copper core brushless motor produces strong power and consumes less energy, it has a high-performance ratio.

Muffler: The motor is equipped with a muffler, it reduces the noise of the motor so you can drive fast and don’t have to worry that you will frighten the fish. Incredible motor for fishers.

Switch Knob Starting System: The switch knob starting system starts fast and saves you the effort and time to start the motor.

Quick Turning: You can change the direction of this motor quickly and make an immediate reaction to avoid dangers. It is very useful when you encounter harsh water situations.

Anti-Winding Function: The motor is equipped with an anti-winding function, you can drive fast without worrying about being trapped in the middle of the water. This function also saves your effort to dive under the water and repair the motor.

High Speed: The rated speed of this motor can reach 3000 r/min, it runs faster than many other motors on the market.

Three-Blade Propeller: The motor is equipped with three blades, it produces more power and makes the motor able to handle more water situations.

Adjustable Speed: You can control the speed by twisting the joystick, the more you twist, the faster the boat goes. Simple operation.

Details

Rotary Joystick: You can control the motor with the rotary joystick that is attached to it. Such operation is simple and convenient.

Aluminum Alloy Suspension Bracket: The suspension bracket is made of aluminum alloy, it is lighter in weight and endures corrosion. 

Durable Control Box Cover: This control box cover is made of strong plastic material. It can effectively protect the motor.

Application

This motor is suitable for all kinds of small boats, rubber boats, Submarines, aluminum alloy boats, and motorboats. This motor can also be used in fishing, aquaculture, outdoor adventure, etc. It can produce high horsepower and thrust for your boats.

Specifications

Brand: HANGKAI

Model: 60V 10.0HP

Rated Power: 2200A

Starting System: Switch knob

Motor Type: Brushless motor

Rated Voltage: 60A

Rated Speed: 3000r/min

Rated Current: 38A

Control System: Tiller control 

Rod Length: 91cm/35.82in

Gross Weight: 17kg/34lbs

Net Weight:14kg/31lbs

Total Height: 132cm/51.96in

Transom Plate Height: 38.1-50.8cm/15-20in

Installation

1. Lose the pin-hinge of the motor 

2. Put the bracket of the motor on the tail of your boat and make sure that it doesn’t fall.

3. Tighten the pin-hinge, and fix the motor on the boat.

4. Start your voyage.

Package Included

1x Electric Outboard Motor

Notes

1. The product does not contain a battery, and the batteries you need should be batteries with a capacity of over 120AH.

2. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

  Model 3 48V 1.8KW

Items Description

1.Features

(1) Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor

(2) A muffler works for the motor to decrease the noise.

(3) Omni-directional rotary joystick

(4) Anti-winding function when Increase the thickening of the propeller

(5) Aluminum alloy suspension bracket: 90° rotatable bracket, more stable and durable.

(6) Easy to install, the motor can be mounted on board without any tools

Be as one with the silent world with this Genuine outboard motor. With huge thrust, a super-strong shaft and speed control, it will put the bait just where it needs to be without the fish ever knowing you're there.

With super-low power consumption, the Genuine gets the most out of your 48V battery. Suitable for small water crafts such as inflatable boats, canoes and aluminum fishing boats. Simply twist the handle and sneak up on the fish at the optimal speed.

2. Specifications

Brand：HANGKAI

Model：48V 

Rated power (W)：1800

Starting system：Switch knob added

Motor type：Brushless motor

Rated voltage (V)：48

Rated speed (r/min)：3000

Rated current (A)：35

Control system：Tiller control

Manipulation mode

Rod length (cm)：91

G.W./N.W.(kgs)：14/11

Total height (cm)：126

Transom plate height (mm)：381 ~ 508

Battery model recommendation：

Choose batteries with a capacity of over 120AHNote:the product does not contain the battery.

warranty: 2 year warranty

3. Application area

Used in fishing, aquaculture, outdoor adventure, etc.

  Model 4 12V 65LBS

65LBS 12V Outboard Motor Electric Trolling Motor Inflatable Fishing Boats 660W

Pay Attention

1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.

4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

SKU:OT-C001-093

Note：
The battery is not included！
Pls Read The Instruction Before You Use It

Specifications

Shaft Type：stainless steel 

Shaft type(inch / mm)：≈15.7″/ 400mm

Shaft Length :15.7 "(400 mm)/Short shaft

Brand：Hangkai
Model：ET65L
Thrust Level :65 pounds (lbs) thrust
Seep control: F5-R2
Motor type: Brush motor
Rated voltage(V):12
Rated speed(R/min):1420
Rated current(A):55
Rated power(W):660
Control handle: Telescopic type
Maximum speed(km/h):11
Noise DB:50db
N.W./G.W.(kgs)10/11
Propeller model(in):3 leaves/10.6
Packing size(cm):107*55*18

Battery model recommendation:
Choose 120A batteries, the maximum power of 2.5 hours of sustainable operation.

Package Include:

· 1x Trolling Motor

· 1x Operation Manual

  Model 5 6HP

6HP 2Stroke Outboard Motor Boat Marine Engine Water-Cooled CDI System

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. 

Technical Parameters

Short shaft: 40cm 

Dimension

Overall length 1040mm(40.9 in)

Overall width 872mm(34.3 in)

Overall height 332mm(13.1 in)

Transom height 44CM(17.3 in)

Performance

Full throttle operating range 5000-6000r/min

Maximum output 4.4KW/6HP

Idling speed ( in neutral) 1000±100 r/min

Engine

Gear positions Forward-neutral-reverse

Gear ratio 2.15(28/13)

Trim and tilt system: Manual tilt

Drive unit

Recommended fuel Regular unleaded gasoline

Integral fuel tank capacity 2.5L

Recommended engine oil 2-stroke outboard motor oil

Engine oil type Genuine or recommended 2str engine oil

Lubrication System Engine oil mixed gasoline

Engine oil mixing ratio Fuel 50: Engine oil 1

Gear oil quantity 195ml(6.6 fl.oz.)

Tightening torque for engine

Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)

Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)

Notice: Please add gear oil to the gears before use the motor and replace gear oil after the run-in period（10hours）. (if you do not know how to handle this, please contact with us ) 
 

Model 6 12V 40LBS

Note：

The battery is not included！

Please Read The Instruction Before You Use It

Do not shift too fast, you need to switch one by one.

Specifications：

Brand：SUNELEXE

Model：L40

Thrust（kg）:30

Speed control: F5-R2

Motor type: Brush motor

Rated voltage(V):12

Rated speed(R/min):1700

Rated current(A):34

Rated power(W):408

Control handle: Telescopic type

Maximum speed(km/h):6

Noise DB:50db

Thrust（kg）:It is recommended to propel small boats weighing less than 200kg

N.W./G.W.(kgs)7.8/9.3（17.2/20.5lb）

Packing size(cm):102*41*16（40.16*16.14*6.30inch）

Battery model recommendation:

Choose 12V 100A batteries, the maximum power of 3 hours of sustainable operation.

Package Include:

· 1x Trolling Motor

· 1x Operation Manual

 Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Don't do the following will avoid cylinder Scoring:

1，start the motor on bank

2, use the motor when it stop coming out of water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

 Model 7 12V 58LB

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Note：

The battery is not included！

Pls Read The Instruction Before You Use It

Do not shift too fast, you need to switch one by one.

1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon

2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed

3.It can be marched with inflatable boats, rubber boats or fishing boats

4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat

Specifications

Brand：SUNELEXE

Model：L58

Thrust Level :58 pounds (lbs) thrust

Speed control: F5-R2

Motor type: Brush motor

Rated voltage(V):12

Rated speed(R/min):1700

Rated current(A):51

Rated power(W):612

Control handle: Telescopic type

Maximum speed(km/h):10

Noise DB:50db

N.W./G.W.(kgs)10/11

Propeller model(in):3 leaves/10.6

Packing size(cm):101*46*16CM(39.76*18.11*6.29inch)  

Shaft Length :15.7 "(400 mm)/Short shaft
Thrust 58 lb  

Battery model recommendation:

Choose 12V 150A batteries, the maximum power of 3 hours of sustainable operation.

Package Include:

· 1x Trolling Motor

· 1x Operation Manual

  Model 8 2Stroke 2.3HP

  Note: Before using the motor, please add gear oil to the gear and replace the gear oil after the running-in period (10 hours). (If you don't know how to handle it, please contact us). Please do not equip our outboard engine with gear oil. Please prepare it yourself. Remember to refuel on the gear before use!!!

About certification:

We can only provide CE certification, no other certification can be provided, thank you for your understanding.

Please note:

1. About noise: All gasoline engines are very noisy. At present, we have not tested decibels, but the noise is the same as that of motorcycles, so this is normal.

2. The machine itself is light in weight and can be used on board no more than 100kg, with a load of 4 people, but the speed is definitely different when people or 4 people. Please pay attention to customers who have high expectations for speed.

3. Can march with inflatable boats, rubber boats or fishing boats.

4. Necessary: You must prepare a boat motor bracket or hanging plate on board.

Two strokes of 2.3 horsepower are controlled by the handle and the handle is operated by the clutch. No neutral, only idle mode or low speed mode

Strictly for professionals only

Please note:

We do not provide consumables for free (such as pulling the starter).

If you want to buy, please contact us

Short axis: 750MM

Description:

Full throttle operating range: 8500r / min

Maximum output power: 2.3HP

Speed: 10 km/h

Type: 2 strokes

Ignition System: CDI System

Start the system: manually start

Staring at the carburetor system: choke start

Engine and propeller ratio: 2:1

Recommended fuel: ordinary unleaded gasoline

Fuel ratio: 25:1 (please note this version and ignore the manual on this)

Gear ratio: 27/13

Top speed: 10 km / hour

Built-in fuel tank: 0.85L

Fuel consumption per hour: 1.5 liters

OUTBOARD ENGINE
Overall length: 107cm
Overall width:37cn
Overall height:26.5cm
Transon height:7cm
Weight: 8. 5kg
Max speed: 6500-8500rpm

Notice:

After cruising in sea water or drowning

1. Use fresh water to clean the outboard motor

2. Circulate the engine at moderate speed .

3. Do not leave the outboard motor outside until you have completely cooled the water. Otherwise the water cam enters the cylinder through the exhaust port.

From there it will cause an engine failure.

4. The engine should be stored in a dry and ventilated place to avoid direct exposure to the sun.

5. You should use up the gasoline in the tank before long-term storage.

  Model 9  2 Stroke 3.5HP #1

  Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don't do the following will avoid cylinder Scoring:
1，start the motor on bank
2, use the motor when it stop coming out of water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

Pay Attention

1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.

4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat. 

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. 

SKU：OT-ML-279

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

Please Notice:STRICTLY FOR PROFESSIONAL USE ONLY

What you will receive is our new version of this boat engine

The trademark will be Yadao instead of Speeda. 

Short Shaft:40cm

Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:(3.5HP)
Speed:12km/h(four people)
Type:2-stroke
Ignition system:CDI system
Starting system:Manual start
Staring carburetion system:Choke start]
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel:Regular unleaded gasoline
Fuel to oil ratio: 35:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
When at normal cruising,the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in
simple let the engine revolve 180 and the operation handle face back,the boat can fall back to drive.
Announcements
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the
air cylinder, from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.

   Model 10  2 Stroke 3.5HP #2

Notice:

Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. 

Pay Attention

1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.

4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.

Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode 

STRICTLY FOR PROFESSIONAL USE ONLY

Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)

We don't supply wearing parts (pull starter)for free.
If you want buy one please click:

Short Shaft:40cm

Description:

Overall length:92CM
Overall widteh:36.5cm

Overall height:22cm

Transom height:42cm

Full throttle perating range:4000-5000r/min

Maximum output:(3.5HP)

Speed:10km/h

Type:2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark:7-1/45-A(inch)

The engine and the propeller ratio:2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 35:1 （Please be suject to this version, and disregard the manual about this point）

Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L

When at normal cruising, the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling

back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve

180 and the operation handle face back, the boat can fall back to drive.

Announcements

After in the sea water or turbid water cruising

1.Use the fresh water cleaning the outboard motor

2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.

3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder,

from that will cause the engine breakdown.

4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.

5.Before the long term storing,you should run out of the gasoline in the fuel tank.

NOTE:

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don't do the following will avoid cylinder Scoring:
1，start the motor on bank
2, use the motor when it stop coming out of water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
   Model 11 2 Stroke 3.6 HP

  Note:If you have any problems with the quality of the goods you can contact us, we can refund or replace as soon as possible.Please read the return policy below for details.

We will do a good job of after-sales service to ensure that there is no problem with the goods you receive.

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding

Note: Please install gear oil first before using the motor.Otherwise the motor will be damaged.Please contact us if you need videos.

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

Features:

. Features 360 degree steering rotation for reverse without gear shifting

. Start-In-Gear protection/clutch feature prohibits prop rotation while idling

. Lift/Tilt feature for shallow water operation and convenience

. Superior engine water cooling system for improved engine performance

. Easy pull off engine cover with push button latch for instant motor access

. Standard CDI ignition system for easy starting and improved performance

. Vertical mount engine design for increased power, performance and durability

. Superior carbonation system with primer bulb for increased efficiency

. Twist grip throttle handle and engine stop button for improved response

. Superior outboard anti corrosion system and anodes for increased durability

. Durable cast aluminum construction for superior corrosion protection

. Through the prop exhaust outlet for decreased noise and pollutant

Black propeller or white propeller would be sent in random

Shipping Weight: 21.4 pounds

Short shaft ：40cm

Stroke: 2-Stroke 

Engine(HP): 3.6HP

Ignition Systerm: CDI system

Cooling Systerm: Water Cooling

Hard to start

1.please make sure the ratio of Gasoline: Oil = 35：1.Please DO use special oil for 2-stroke motor.

2.press the button on the carburetor for several times until the yellow and black pipes are full of oil.

3.leave the throttle in the start position before starting,and then keep it in the ON position after running

P.S.

About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon

The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed

It can be marched with inflatable boats, rubber boats or fishing boats

Necessary: you have to prepare a boat-motor stand or Hanging board on your boat

    Model 12 2 Stroke 12 HP 

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Must Read before using!

Two stroke 12 hp:

Firstly, Fill the gear oil (open gear box lid and fill it).

Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.

Thirdly, Fill engine oil don't exceed the head of the pattern.

Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.

Then, Rapidly pull the starter line.

After the motor start, please turn the throttle to running state.

Then, it can be operated now.

Don't do the following will avoid cylinder Scoring:

1，start the motor in the water

2, use the motor when it stop cyling water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn't retract all the way when you attend to start the engine

Brand: HANGKAI

Displacement: 169CC

Gear ratio: 2.08(27:13)

Cylinder: 2

Max.Output(kw): 8.8

Max.speed(r/min): 4500-5500

Gear Positions: F-N-R

Packing size: 120x70.5x37.5cm

Ignition System: CDI

Cooling System: Water-cooling

Control System: Tiller control

Starting System: Manual start

Control System: #93 gasoline

N.W./G.W.(kgs): 27/31

Bore x Stroke(mm): 50x43

Recommended Propeller range: 3 -9"1/4''x8"

Recommended Lubricant: 2 Stroke Lubricating oil

Mixing ratio: Fuel:oil=50:1

Trim and tilt system: Manual Tilt

Overall LxWxH(cm): 78.3x33.2x104

Standard fuel tank capacity: 24L

    Model 13 2 Stroke 18 HP  

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Must Read before using!

Two stroke 18 hp:

Firstly, Fill the gear oil (open gear box lid and fill it).

Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.

Thirdly, Fill engine oil don't exceed the head of the pattern.

Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.

Then, Rapidly pull the starter line.

After the motor start, please turn the throttle to running state.

Then, it can be operated now.

Don't do the following will avoid cylinder Scoring:

1，start the motor in the water

2, use the motor when it stop cyling water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn't retract all the way when you attend to start the engine

Brand: HANGKAI

Displacement: 246CC

Short shaft ：40cm

Gear ratio: 2.08(27:13)

Cylinder: 2

Max.speed(r/min): 5000-6000

Gear Positions: F-N-R

Packing size: 133x71x38.5cm

Ignition System: CDI

Cooling System: Water-cooling

Control System: Tiller control

Starting System: Manual start

Control System: #93 gasoline

N.W./G.W.(kgs): 38.6/49.5

Bore x Stroke(mm): 56x50

Recommended Propeller range: 3 -9"1/4''x8"

Recommended Lubricant: 2 Stroke Lubricating oil

Mixing ratio: Fuel:oil=50:1

Trim and tilt system: Manual Tilt

Overall LxWxH(cm): 78.3x33.2x105.3

Standard fuel tank capacity: 24L