Specifications:
- Brand: AUIMSOCO
- Condition: 100% Brand New
- Light Source：2 Sides auimsoco LEDs
- Material: Aviation Aluminum + ABS
- Color Temperature: 6000K
- Working Voltage: 12V
- Output Power (Each): 40W
- Number of Bulbs: 4
- Waterproof Rate: IP67
- Luminous Flux: 3000lm
- Working Temperature: -40℃ - +80℃
- Bulb Type: 9005/HB3+9006/HB4
- Beam Type: High Beam+Low Beam Combo
- Beam Angle: 360 Degrees
- Lifespan: Over 50,000 hours
- Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
- Fitment Type: Direct Replacement
- Placement on Vehicle: Front, Left, Right
- Color: As the picture shows
(4pcst) 9005 9006 LED Headlight Bulbs Conversion Kit
【Better Driving Experience】The 9005 9006 LED bulbs increase 300% brightness and 100% view, focus beam pattern illuminates reveal road signs, without blinding other drivers
【450 Feet High Visibility】 The 9005 9006 bulbs centralized full beams, allowing you clearly see deer off to the side, avoid repair work and accident, take it easy through rural areas, deserted highways
【5 Years Lifespan】With heatproof glass coating chips, the bulbs can perform well even you drive 12 hours every night, it lasts 3 times longer than halogen, not dim within 5 years
【10 Minutes Installation】0.5-inch ultra thin heat sink, fit for 99% of cars, even with a dust cover. Replace old broken bulbs by yourself can saving your precious time to repair
【6000K Eye-Protection Color】6000K Cool White, the vision is crisp clearer than 3500K Halogen, the color is more comfortable than 6500K Bluish light, reduce eyestrain in nighttime driving
200% BRIGHTER THAN HALOGENS: The 9005 9006 led headlight bulbs provide up to 200% more light with a 6000K cool white clearer color. This is 6 times brighter than your original halogen bulb.
- 2X 9005/HB3 LED Headlight Bulbs High Beam Conversion Kit
- 2X 9006/HB4 LED Headlight Bulbs Low Beam Conversion Kit
- New and old packaging will be shipped randomly
- As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
- Put the vehicle into park or make sure it is securely in gear.
- Make sure to have the ignition turned off and the keys removed.
- Be careful to avoid burns, especially when turning on or off the vehicles lighting.
- Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
- Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
- Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
- Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system)