|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Please check fitment notes & description for accurate information.
1994-1995 Chevrolet C1500 All
1992-1995 Chevrolet C1500 Suburban All
1983-1984 Chevrolet C20 4.1L
1985-1986 Chevrolet C20 4.3L
1985-1986 Chevrolet C20 5.0L
1983-1986 Chevrolet C20 All
1983-1986 Chevrolet C20 Suburban All
1988-1995 Chevrolet C2500 All
1992-1995 Chevrolet C2500 Suburban All
1988-1995 Chevrolet C3500 All
1982-1992 Chevrolet Camaro All
1982-1993 Chevrolet Caprice All
1982-1998 Chevrolet Cavalier All
1982-1990 Chevrolet Celebrity All
1980-1987 Chevrolet Chevette All
1982-1983 Chevrolet Citation All
1984-1985 Chevrolet Citation II All
1987-1996 Chevrolet Corsica All
1982 1984-1993 Chevrolet Corvette All
1982-1987 Chevrolet El Camino All
1982-1995 Chevrolet G10 All
1982-1995 Chevrolet G20 All
Oxygen Sensor's Location: How do I know the O2 sensor is good or not? Check engine light on A reduction in fuel economy.
Your catalytic converter fails unexpectedly
Exhaust emissions reach undesirable levels.
How to install the oxygen sensor? Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts. Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal. Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached. Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.) Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends. Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage. Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed. Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared. Must Know Before Buying: The following information is for instructional and guidance reference only. We try and make them as accurate as we can. If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks. Items that have been installed, altered or contaminated are non-returnable. 1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty. 2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return. The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
Item Specifics | |
---|---|
Brand | Outstanding-Carparts |
Manufacturer Part Number | OU11260663050758PARTS |
Manufacturer Warranty | 1 Year |
Warranty | 1 Year |
Interchange Part Number | o2 sensor cost, 02 sensor, oxygen sensor car, replacing o2 sensor |
Other Part Number | 12014A |
Superseded Part Number | ES10966-A |
Custom Bundle | No |
Modified Item | No |
Number of Pieces | 1 |
Fitment Type | Direct Replacement |
Thread Size | M18 |
Terminal Type | Blade |
Universal Or Specific Fit | Specific |
Attachment Method | Screw-On |
Connector Gender | Male |
Wire Harness Length | 19.69 IN |
Sensor Type | Non Heated |
Wire Quantity | 1 |
Output Signal Range | 0.2V To 0.8V |
Mounting Type | Threaded |
Pin Quantity | 1 |
Position | Upstream, Sensor 1 |
Type | Oxygen Sensor |
Type | Sensor |
Features | Direct Fit |
We Will Only Accept PayPal Payment or Credit/Debit Card Through PayPal, We Will Only Ship To PayPal Confirmed And Verified Address, Please Update Your Shipping Address On eBay And PayPal Before Placing The Order. For Any Returned/Undeliverable Package, Reshipping Fee Will Be Charged. Sales Tax Will Be Applied To All California Shipment.
All E-Check Payments Such as Bank Transfer or Credit Card Will Be Processed Once Payment Clears. For Accurate And Fast Service, Please Update Your Shipping Address or Choose The Correct Shipping Address Before Submitting Payment.
Positive Feedback Will Be Left Immediately After Payment is Received in Full. We Would Appreciate it If You Could Do The Same. If You Have Any Problems or Concerns, Please Contact us Prior To Leaving Feedback And We Will Gladly Assist You. Satisfaction Guaranteed.
We DO NOT SHIP TO PO BOXES, And Customer Needs To Provide a Physical Address.
All Orders Will Ship Within 1 Business Days After Payment Verified, Most Of Our Items Are Shipped With FedEx or Smaller Sized Items Are Shipped With USPS Priority Mail or First Class Mail. You May Expect Your Order To Be Delivered Between 3 To 7 Business Days Of Placing Your Order If It is Delivered By UPS or 2-7 Days By USPS.
We Will Ship Items Over 3lbs with FedEx To U.S. Domestic & Canada. Buyers Outside U.S. (Except Canada) Are Responsible For Any Brokerage's Fee Charged By FedEx. Canada & International Customer Please Note: Canadian Government Might Charge A Duty Tax (Brokerage Fees). This is Not Charged by Our Company and We Are Not Responsible for This Brokerage Fees. Other International Customer Are Responsible For Duties And Taxes.
If You Have Any Question Regarding Why You Are Being Charged This Fee. Please Refer To Your Government Official Website. Brokerage Fee Varies Upon The Value or The Product, For Rate Information, Please Refer To UPS.
Free Ship or Discounted Rate Only Applies Within 48 States Of USA. For Item Ship To (PO Box, Hi, Pr, Apo, GU, Vi, Mp And International), Additional Shipping Charge Will Apply. Please Email Us For More Information Before Placing Order.
All Packages Will Be Inspect Before Shipping, We Will Provide All Packing Material Needed For Your Package For Shipping Such As Boxes, Cushioning And Tape To Improve Shipping Quality.
Due to high volume of shipments every day, once we received your payment, we will ship out the order as soon as possible, so there is high possibility of not able to cancel any order or changing the shipping address for you, so please make sure you really need the item or shipping address is the correct one before placing order to avoid any issue, thank you for your understanding and cooperation.
All of Our Items Are 100% Brand New, We Do Not Sell Anything Other Than That. If The Item Shows Up Defective or Broken, Please Contact Us Within 3 Business Days By Using "Ask A Question" Link Located At The Bottom of Our Listing. Your Questions/Concerns Will Be Responded Within 24 Hours Monday To Friday. Buyers May Contact us On The Weekends or Pubic Holidays And We Will Respond On The Next Working Day. Some of Our Items May Not Be Legal For Street Use in Some States. It is Your Responsibility to Check Your Local Law Enforcement for Street Use.
We Will Offer Replacements, Exchange or Full Refund. 100% Satisfaction Guaranteed. We Will File Damage Or Lost Claim For Our Buyers And Guaranteed Buyers Will Receive Products In A Timely Manner.
For Better And Faster Service, We Suggest Buyers Provides Their Contact Phone Numbers For us And our Customer Service Team Will Contact Them For Additional Information. Thank You.
How Should You Contact us?
Please Read The Item Description And See if The item Fits Your Vehicle Exactly. If You Found Any questions, Feel Free to email us by "Ask a question"
Our Office Hours Are Monday - Friday 8:00am - 5:00pm PST / 11:00am - 8:000pm ET, We Do Not Answer Any E-Mails On Weekend, And We Will Reply All E-Mails In The Order It Was Receive.
All E-Mail Take Us Around 24 Hours To Respond To Any E-Mail. We Are Close During The Weekends And We Do Not Answer Any E-Mails During That Time.
Shop Category Hot Item Excellent Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us default 100 shop_cat_ordering |
Upstream 02 Oxygen Sensor O2 For 1982-1992 Chevrolet Cavalier Caprice Camaro
Please check fitment notes & description for accurate information. 1994-1995 Chevrolet C1500 All 1992-1995 Chevrolet C1500 Suburban All 1983-1984 Chevrolet C20 4.1L 1985-1986 Chevrolet C20 4.3L 1985-1986 Chevrolet C20 5.0L 1983-1986 Chevrolet C20 All 1983-1986 Chevrolet C20 Suburban All 1988-1995 Chevrolet C2500 All 1992-1995 Chevrolet C2500 Suburban All 1988-1995 Chevrolet C3500 All 1982-1992 Chevrolet Camaro All 1982-1993 Chevrolet Caprice All 1982-1998 Chevrolet Cavalier All 1982-1990 Chevrolet Celebrity All 1980-1987 Chevrolet Chevette All 1982-1983 Chevrolet Citation All 1984-1985 Chevrolet Citation II All 1987-1996 Chevrolet Corsica All 1982 1984-1993 Chevrolet Corvette All 1982-1987 Chevrolet El Camino All 1982-1995 Chevrolet G10 All 1982-1995 Chevrolet G20 All
Oxygen Sensor's Location: How do I know the O2 sensor is good or not? Check engine light on A reduction in fuel economy. Your catalytic converter fails unexpectedly Exhaust emissions reach undesirable levels. How to install the oxygen sensor? Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts. Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal. Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached. Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.) Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends. Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage. Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed. Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared. Must Know Before Buying: The following information is for instructional and guidance reference only. We try and make them as accurate as we can. If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks. Items that have been installed, altered or contaminated are non-returnable. 1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty. 2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return. The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
Payment
We Will Only Accept PayPal Payment or Credit/Debit Card Through PayPal, We Will Only Ship To PayPal Confirmed And Verified Address, Please Update Your Shipping Address On eBay And PayPal Before Placing The Order. For Any Returned/Undeliverable Package, Reshipping Fee Will Be Charged. Sales Tax Will Be Applied To All California Shipment. Shipping
All Orders Will Ship Within 1 Business Days After Payment Verified, Most Of Our Items Are Shipped With FedEx or Smaller Sized Items Are Shipped With USPS Priority Mail or First Class Mail. You May Expect Your Order To Be Delivered Between 3 To 7 Business Days Of Placing Your Order If It is Delivered By UPS or 2-7 Days By USPS. Returns
All of Our Items Are 100% Brand New, We Do Not Sell Anything Other Than That. If The Item Shows Up Defective or Broken, Please Contact Us Within 3 Business Days By Using "Ask A Question" Link Located At The Bottom of Our Listing. Your Questions/Concerns Will Be Responded Within 24 Hours Monday To Friday. Buyers May Contact us On The Weekends or Pubic Holidays And We Will Respond On The Next Working Day. Some of Our Items May Not Be Legal For Street Use in Some States. It is Your Responsibility to Check Your Local Law Enforcement for Street Use. Contact Us
How Should You Contact us? All rights reserved. |