Package contents:
  • 1 x SH24BTA-N WiFi booster
  • 1 x RG316 cable with SMA connectors (20cm)
  • 1 x 6dBi omni antenna
  • 1 x power supply
  • 1 x user manual

This product is the equipment attached to the model by special stickers, Dedicated power line, Do not need any modification, Can be used after installation.


Usage:

  1. Remove the antenna on the wireless AP or wireless router first.
  2. Take out the SMA cable (RG316) and connect the wireless AP (wireless router or wireless network card) with the TO Radio port of the signal amplifier.
  3. Connect th antenna to the other end of the signal amplifier.
  4. Plug in the power and it's done.
Product features:

1. Increase the coverage and stability of wireless networks;

2. Support 2.4G B/B+/G/N super G wireless network and Bluetooth devices, and the frequency range is 2400-2500MHz, which is an internationally recognized industrial frequency band;

3. The strongest output power is 3W(35dBm), bidirectional, half-duplex and automatic switching (plug and play), and automatic gain control;

4. SMA connector, which is convenient for replacing various antennas and can be connected with indoor and outdoor directional and omnidirectional antennas;

5. It can be used with Bluetooth devices, wireless network cards, wireless routing and wireless AP;

6. The input level is not limited, even if the input power is high, it will not burn out;

7. All-aluminum alloy construction is convenient for heat dissipation;

8. Simple and convenient installation, no need for software, plug and play;


FAQ (Frequently Asked Questions)

1. How much can the signal be amplified by adding this product?

A: The power of our ordinary home wireless router is generally 80-100mW (milliwatt). After adding this product, the maximum power output can reach 3000mW (milliwatt). You can imagine the effect and function of adding this product in your own environment!


2. What kind of wireless products can support this product?

A: Our products support 2.4GHz WLAN 802.11b, 802.11b+, 802.11g, 802.11b+g+N, wireless 2.4G AP, 2.4G wireless bridge, 2.4G wireless router, 2.4G wireless network card, 2.4G wireless monitoring, 2.4G wireless microphone and 2.4G Bluetooth device.

3. Can the router be encrypted after adding this product?

A: Any encryption such as WEP/WPA/WPA2 can be supported!

4. Is this product suitable for outdoor use?

A: This product cannot be placed outdoors! But it can be packed in a waterproof box!

5. What is the difference between 2.4bg and 2.4bgN?

Answer: The maximum transmission rate of 2.4bg is 54MB, but the maximum transmission rate of 2.4BGN is 150MB, and the relative bandwidth will be much better than BG, provided that your router supports BGN router. If you use BG router, the maximum output is still 54MB.

6. Special notes:

Answer: The power amplifier is not suitable for high-power equipment, because the high-power product itself will output large power. If it is installed on this product, it will lead to saturation protection of the equipment and distort the signal, which is counterproductive. It is strongly recommended that it be used on the equipment that outputs low power, and the effect is better and more obvious.