Description:
1. Name: Four-edge solid alloy end mill
2. Coating: TiSiN coating
3. HRC: 55°
4.Helix angle: 35°
5. Number of blades: 4
6. Applicable materials: stainless steel, cast iron, tool steel, alloy steel, graphite, plastic, composite materials, etc.
7. Applicable machines: CNC machining centers, engraving machines, precision engraving machines and other high-speed machines
8. Appropriately reducing the cutting speed and feed speed can extend the service life of the milling cutter.
9. Cutting fluid needs to be added during work to protect the knife edge and make cutting smoother.
10. If there is an oxide film or other hardened layer remaining on the surface of the workpiece, it can be removed by reverse milling.
11. Before using the tool, please measure the tool deflection. The tool deflection accuracy is extremely high.
When it is 0.01mm, please correct it before cutting.
12. The shorter the length of the tool protruding from the chuck, the better. If the tool protrudes longer,
It is necessary to reduce the rotation speed, feed rate or cutting amount.
13. If abnormal vibration or sound occurs during cutting, please reduce the speed and
amount of cutting until the situation improves.
14. Spray type and air jet type are preferred for steel cooling, which can improve the use of milling cutters.
Effect.
2. Coating: TiSiN coating
3. HRC: 55°
4.Helix angle: 35°
5. Number of blades: 4
6. Applicable materials: stainless steel, cast iron, tool steel, alloy steel, graphite, plastic, composite materials, etc.
7. Applicable machines: CNC machining centers, engraving machines, precision engraving machines and other high-speed machines
8. Appropriately reducing the cutting speed and feed speed can extend the service life of the milling cutter.
9. Cutting fluid needs to be added during work to protect the knife edge and make cutting smoother.
10. If there is an oxide film or other hardened layer remaining on the surface of the workpiece, it can be removed by reverse milling.
11. Before using the tool, please measure the tool deflection. The tool deflection accuracy is extremely high.
When it is 0.01mm, please correct it before cutting.
12. The shorter the length of the tool protruding from the chuck, the better. If the tool protrudes longer,
It is necessary to reduce the rotation speed, feed rate or cutting amount.
13. If abnormal vibration or sound occurs during cutting, please reduce the speed and
amount of cutting until the situation improves.
14. Spray type and air jet type are preferred for steel cooling, which can improve the use of milling cutters.
Effect.
Package include:According to your choice.
