Bench Power Supply DC Power Supply Variable 30V 5A Precise 4-Digital UK plug
DPS305U(30V 5A)
 Bench Power Supply DC Power Supply Variable 30V 5A Precise 4-Digital UK plug
220V UK Plug
 
Product description:
DPS series products are a three-window four-bit high-precision switching DC regulated power supply , which can display voltage , current and power at the same time . Products are widely used in mobile phone maintenance , computer maintenance , school and production line use , its output voltage and output current can be continuously adjusted between 0 and nominal value . Power supply stability and ripple coefficient are very good, with USB fast charging function and perfect short circuit protection circuit . It is small in size , beautiful in design , convenient in operation , and can work long hours at full load It is loved by the vast number of users .
 
Specifications:
  • Model: DPS305U
  • Output voltage: 0-30Vfor 305U
  • Output current: 0-5A for 305U
  • Output power: 150W for 305U
  • Auxiliary output: USB Quick Chang 18w, Supports multiple quick charging protocols
  • Input voltage: AC220V,50HZ
  • Plug type: UK plug
Working TEMP 0-40℃ ; Humidity : 80 % RH
Storage TEMP -10-70℃ ; Humidity : < 70 % RH
C.V: Voltage stability ≤0.1 % + 3mv; Load stability≤0.1 % + 3mv; Ripple noise :≤20mvrms ( Effective value )
C.C:Current stability ≤0.1 % + 3MA; Load stability≤ 0. 2 % + 3MA; Ripple noise : ≤5mArms (Effective value)
  • Protection mode:Current limiting protection / short circuit alarm stop output and self-recovery
  • Display: Four-digit digital tube , three-window display
  • Accuracy : 0 . 5 % + 3digit
  • Resolution :Voltage 0.01V; current 0.001A
  • Product size: L225mm x W90mm x H145mm
  • Weight: 1.8kg
  • Fuse: 2A for DPS305U/3A forDPS3010U
 
Operation instructions:
There are two modes of power output : constant voltage output ( C V ) and constant current output ( C C ) . The output mode is determined by the voltage and current values set by the user and the load that the user receives . The output voltage or current value of the power supply will not exceed the voltage and current value set by the user. In the constant voltage mode , the output voltage is equal to the voltage set by the user. In constant current mode, the output current value is equal to the current value set by the user.
 
☆Voltage Regulation 
  • 1. Adjust the voltage roughly to the required voltage value , the fine-tune the knob to the required specific voltage value
  • 2. In general , the current knob can be adjusted to the maximum , and then the load can be connected for use
☆Current regulation
When the user needs to adjust the limiting current output
  • 1. firstly , adjust the voltage to about 5-10V , then short-circuit the positive and negative terminals with wires ( short-circuit alarm needs to be set to C C position )
  • 2. Adjust the current to roughly adjust the knob to the required current value , and then fine-tune the knob to the required specific current value
  • 3. After disconnecting the short-circuit conductor and adjusting the required voltage by voltage regulation " method , the connection load can be used
 
 
Packing List
1 x whole machine 
1x Power cord
1x Output Load Line 
1x Instructions
 

 
 

 

 
PushAuction


On 21-May-2024 at 10:01:06 BST, seller added the following information:

DataCaciques