30 X (No Strip) 222 /413 /221 Applications

- Low voltage lighting system
- HVAC control circuit
- Junction boxes in wall or ceiling
- Mobile homes

 Junction Box Push Wire Connectors

Available in 2, 4, 6 and 8 pole, these colour coded connectors are suitable for 0.75mm to 2.5mm solid and 1.5mm to 2.5mm stranded cables. The new 3 pole version is suitable for solid and stranded cables from 1.5mm to 2.5MM

Simply pushing the stripped cable into the connector makes the connection; the transparent housing, a feature of all the connectors in the range, provides a visible indication that the cable is secure.

There is a test point in the housing. The cables are removed by holding the wire and twisting left/right while pulling on the connector, which means the connector can be re-used. Also available is a fixing carrier that is designed to secure the connectors into a junction box or onto DIN rail. The rating is 250V, 32A and 

PCT-102
No. of Poles 1 
Total number of connection points 21 
Total number of potentials 1  
Color transparent  
Pollution degree (1) 2  
Rated voltage EN (1) [V] 250V 
Rated surge voltage (1) [kV] 4 kV 
Nominal current [A] 24 A 
Connection technology (1) PUSH WIRE®  
Solid sizes 1 0.75 … 2.5 mm² / 18 … 12 AWG  
Strip length 1 12 mm / 0.47 in  
Type of wiring Side-entry wiring  
Weight [g] 1.847 g 
Width 9.2 mm / 0.362 in  
Height 13.1 mm / 0.516 in  
Length 19.5 mm / 0.768 in  
Safety information 1 In grounded power lines 
Block Wire Connectors.