Vehicle Compatibility Information
Chevrolet Blazer 1997-2005 V6 4.3L Front Left 4WD, w/o High Rider Package (ZR2)
Oldsmobile Bravada 1997-2001 V6 4.3L Front Left
Chevrolet S10 1997-2000 ELECTRIC Front Left 4WD
Chevrolet S10 1997-2003 L4 2.2L Front Left 4WD
Chevrolet S10 1997-2004 V6 4.3L Front Left 4WD
GMC Jimmy 2002-2005 V6 4.3L Front Left 4WD, w/o High Rider Package (ZR2)
GMC Jimmy 1997-1998 V6 4.3L Front Left 4WD, w/o High Rider Package (ZR2)
GMC Jimmy 1999-2001 V6 4.3L Front Left 4WD/AWD, w/o High Rider Package (ZR2)
GMC Sonoma 1997-2003 L4 2.2L Front Left 4WD, w/o High Rider Package (ZR2)
GMC Sonoma 1997-2004 V6 4.3L Front Left 4WD, w/o High Rider Package (ZR2)
Isuzu Hombre 1998-2000 L4 2.2L Front Left 4WD
Isuzu Hombre 1998-2000 V6 4.3L Front Left 4WD
What Are The Signs Of a Failing CV Axle?
You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
The steps and tools needed for an CV axle replacement
This is a challenging and technical project
Tool List
Jack
Jack stands
Automotive tool set (pliers, screwdrivers, sockets)
Pry bar
Lubricant
Brake Cleaner
Hammer or mallet
Impact wrench (optional)
CV axle replacement
Pro Tip
Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required
1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.
Tip: Leave one side assembled while you work on the other so you can remember how things go back together.
2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.
3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the frame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.
4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.
5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.
6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.
7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.
Noticed
-Instruction is not included. Professional installation is recommended
-Accessories: You will get exactly showing in the picture
-Please confirm your original part number before purchasing
-Please contact us for anything we can help you with