SIRIUSHAIR® MANUFACTURED AND USED GHD ORIGINAL REPLACEMENT SPARE PARTS FOR GHD PLATINUM + S8T262 HAIR STRAIGHTENER. 

  • Please ensure you are suitably qualified and equipped to carry out electrical repairs. 
  • These parts are for the PLATINUM + (S8T262) hair straightener, the model can be found on the side without the switch.
  • These parts do not fit the PLATINUM (S8T261)  for these parts please look at our other listings.
  • Find your part required on the dropdown list (The colour of the GHD has no relevance to the part).
  • TUV / CE Certified UK RoHS compliant.
  • PLEASE ensure after carrying out any repair to a GHD you leave for 30 minutes before use to ensure the temperature has settled and the safety cut out feature activates correctly.
Heaters are ALL tested before dispatch. 
  • If you have a failed Q4 Mosfet (Included) with all heaters, the replacement original heater, with a PEPI H1 fuse attached, will crack in half on the switch side of the GHD, this damage is final and cannot be fixed.
  • If you have a SIRIUSHAIR replacement element a failed Q4 Mosfet (Included) will cause the solder, on the point furthest to the connecting wires, on the switch side, to melt, saving the heater, replace the Mosfet and resolder the thermal fuse, you will need solder skills to accomplish this repair.
  • This Q4 Mosfet is slightly bigger than the original and we are awaiting manufacture of an exact sized one.

Repair Order:

Do not apply power.
  • Check both heater elements with a multimeter for continuity across all four wires, both inner wires are the heater/thermistor and both outer wires are the attached thermal fuse.
  • Even if you have continuity pull gently on all four wires as a short will show by a detached wire, replace heater.
  • If you check the metal pads on the ceramic heaters to ensure no electrical burn which if present will cause a thermal fuse failure, remove with a diamond file or replace with a new heater.
  • If you have a cracked heater then you MUST replace the Q4 mosfet.
  • Ensure wires from heaters are all pressed firmly into the PCB connectors.
  • If after powering on you get the red light then check wires from heaters are connected to the PCB correctly.

We are including the Q4 mosfet to help you repair, save money and help the environment, however it is not a repair for the faint hearted.....but when your hair straightener is brought back to life the sense of accomplishment will be great....