Silent Power - All-in-One Pre-Assembled Solar Off-Grid Cabinet 2X 11kW Ultra MAX
Fitted with TWIN Solar Off Grid Inverters - Conversol MAX-11KW
The largest Single Phase inverter with online monitoring system - Solar Assistant / Orange PI controller
Dimensions of the Cabinet : 140cm Wide x Height 120cm x Depth 25cm
We manufactured an off-grid system that is plug and play, the first off-grid solar inverter that is pre-wired in a metallic outdoor cabinet. The inverter is also compatible with major lithium-ion batteries like the Pylontech, the BMS cable (battery management system) is included.
Note: We used pictures from various projects with Silent Power Cabinets at 22W, the one that you will receive contains orange inverters not white. The actual inverter is the new model Ultra 11kW (see photographs)
The cabinet is capable of producing 22kW of continuous AC power and accept back up from the natioal grid or a diesel generator. The system is fully wired and literally plug 'n' play
What you have to do:
- Connect the solar cables to the fused terminals of the inverter
- Connect the AC Output plug to the consumer unit
- Connect the AC Input plug to the backup source (grid or generator)
- Connect your batteries (lithium or GEL) to the 200A Fuse disconnector
That's it you are ready now to switch on the Silent Power Cabinet, we eliminated any risk of short circuits and wrong connections.
There are only 3 things you need to set up
1. In Menu 5 of the inverter, you need to select the battery type (lithium, AGM, User defined).
2. Connect the Wi-Fi Solar Assistant or the ethernet plug. You will be able to monitor your system remotely.
3. Set the timer to charge the batteries for specific hours (optional).
What is included inside the cabinet
Our Solar Technicians assembled and tested under full conditions the following items
- 11kW Off Grid Solar Inverter with integrated MPPT charger 180A
- 2x PV Strings 20A maximum, fused with surge protector, and dc isolator
- 250A Battery fuse disconnector
- Victron Bluetooth smart shunt 500mA
- Solar Assistant Microcontroller with registered account ready to monitor your system remotely for life No subscription required
- Protected AC Input
- Protected AC output
- Cooling fan controlled via thermostat
- External 3 pin splash proof plugs
- All the above in a metallic cabinet suitable for outdoor use.
Full Specifications of Solar Inverter 11kW MAX Ultra
MAIN FEATURES
- High PV input voltage range
- Removable LCD control module with multiple communications
- Selectable high-power charging current
- Built-in Wi-Fi for mobile monitoring (App is available)
- Configurable AC/Solar input priority via LCD setting
- Reserved communication port for BMS (RS485 or CAN-BUS)
- Parallel operation up to 6 units (parallel kit not included)
- Max PV Input 12000Watt
TECHNICAL SPECIFICATION TABLE FOR THE INVERTER
| CONVERSOL 11KW MAX ULTRA |
| MODEL |
VOLTACON Ultra 11K |
| Rated Inverter Power |
11000VA/11000W |
| PARALLEL CAPABILITY |
YES, 6 units |
| INPUT (Utility & Generator Power) |
| Voltage |
230 VAC |
| Selectable Voltage Range |
170-280 VAC (For Computers)
90-280 VAC (For Home Appliances) |
| Frequency Range |
50 Hz/60 Hz (Auto sensing) |
| OUTPUT |
| AC Voltage Regulation (Batt. Mode) |
230VAC ± 5% |
| Surge Power |
22000VA |
| Efficiency (Peak) |
93% |
| Transfer Time |
10 ms (For Personal Computers), 20 ms (For Home Appliances) |
| Waveform |
Pure Sine Wave |
| BATTERY |
|
| Battery Voltage |
48 VDC |
| Floating Charge Voltage |
54 VDC |
| Overcharge Protection |
63 VDC |
| SOLAR CHARGER & AC CHARGER |
|
| Solar Charger type |
|
| Maximum PV Array Power |
12000W (6000W x 2) |
| MPPT Range @ Operating Voltage |
90 ~ 450 VDC |
| Maximum PV Array Open Circuit Voltage |
500 VDC |
| Maximum PV Input Current |
27A x 2(MAX 40A) |
| Maxmum Solar Charge Current |
150A |
| Maximum AC Charge Current |
150A |
| Maximum Charge Current |
150A |
| PHYSICAL |
|
| Dimension, D X W X H (mm) |
145x 438 x 553.6 |
| Net Weight (kgs) |
18.4 |
| Communication Interface |
USB/RS232/RS485/WiFi/Dry-contact/BTS
Support optional GFCI, Rapid shutdown, AFCI detection |
| External current sensor port |
Yes, built-in current transformer sensor |
| OPERATING ENVIRONMENT |
|
| Humidity |
5% to 95% Relative Humidity(Non-condensing) |
| Operating Temperature |
-10℃ to 50℃ |
| Storage Temperature |
-15℃ to 60℃ |
| STANDARD |
|
| Compliance Safety |
CE |
* Product specifications are subject to change without further notice
| | | |