NEW Sauna Heater Controller Sauna Room Sauna Control Unit External 40-105 ° C

Specifications：

Working voltage: 380V-415V

Output power: 3-9KW

Current: 4.5-13.7A

Light output: Max.60W

Mode: 8 + 4 mode; normal heating

Temperature range: 40-105 ° C

Overheating protection: support

Package size: 24 * 26 * 7cm

Package weight: 1.5kg

package contents

1 x sauna external control

Features：

High-tech chipboard, excellent external control unit for the sauna heater.

Energy saving design, 2 working modes to choose from.

Overheating protection for safe use.

Can control the light of the sauna room, set heating temperature and time, etc.

Heat-resistant temperature sensor with a length of 3 m.

Compatible with 3-9KW sauna heater.

Suitable for home sauna room, commercial occasions.

2 years warranty, good after-buy service.

Product description：

Details on the function of the external controller:

1. Control of the sauna lamps: To control the switching on and off of max. 60 W lamps in the sauna lamp.

2. Two working modes:

Mode A: 8 + 4 operating hours (max. Working time: 4 hours), max. Working time: 8 hours, e.g. B. Split line: 4:00, heater operating time is 4: 00-0: 00; Is 12: 00-4: 00 (heating does not work). If you do not want to start heating immediately (delay 2 hours to start heating automatically). The time is set to 6:00 a.m.

Mode B: The heating starts working immediately after setting (no working time), maximum working time: 12 hours.

3. Time setting: Press the up button "▲" or the down button "▼" to set the time. 3 seconds later, the countdown will start from the set time and will automatically turn off when the screen shows 0:00. The default time is 2:00.

4. Temperature setting: temperature range: 40-105 ° C, press the up button "▲" or the down button "▼" to set the temperature. The current temperature is displayed 3 seconds later.

5. Switch the sauna heater on and off

6. With temperature sensor: 3 m length, heat-resistant cable for installation in the room.

7. Overheating protection: When the temperature reaches 150 ° C, it is automatically switched off to avoid scalding.

Reminders:

1. The temperature display "---- L" on the screen means that the temperature sensor is not connected properly (or the circuit is broken) or the temperature is below -10 ° C.

2. The temperature display "---- H" on the screen means a short circuit of the temperature sensor or a temperature above 110 ° C.

3. The time is displayed in the countdown mode.

Note: Further information on functions and installation can be found in our English operating instructions.