White:
100% Brand new, TOP A quality, easy to use
Long life time, low power consumption and brighter
New LED (Light Emitting Diode) technology reduces power consumption from 40% to 80%.
Come with built-in CANBUS load resistors to avoid OBC error code
For replacement of Signal light, Turn Light, Brake Light, Parking light, Side marker light, Tail light, Fog Light and Backup lights, etc.
Since the nature of the item being offered might fit a large variety of different vehicle and functions, please make sure this is the correct application type of bulb.
Compatible with: 1157(BAY15D) 1016 1034 1076 1130 1142 1152 1154 1158 1493 2057 2357 2396 2397 3496 3497 7528 12499 12594 P21/5W ...(For Reference Only)
LED Type: 5050 SMD , 3 Chip
LED Q'ty: 18 LED (15 around & 3 forward)
LED colour: Pure White
Socket type: 1157 / BAY15D ...
Voltage: 12V only
Power: 2.5W
Color temperature: 6000K
Luminous flux: 180 - 220LM
Lifespan: 60,000 hours
Head diameter: 20mm
Base diameter：15mm
Total height: 48mm
These are canbus error free, but for some unknown reasons, some cars still produce error when using canbus error free bulbs. Please make sure your car supports error free bulbs before purchasing. You may need to perform the following instructions to resolve the issue:
I have error free bulbs, but they still throw an error, why?
With vehicles that require error free LED bulbs, there is a specific way to install the lights to make sure that there is no error message. Please follow the steps below:
1. Take out the LED bulb and replace it with the stock bulb, turn on the vehicle, and confirm if the error message is cleared.
2. Turn off the vehicle and re-install the LED bulbs (make sure it is the correct side of polarity or else the vehicle will record the error message again). If the LED bulb is installed, but the polarity is incorrect, you will have to start the troubleshoot again from step one (1).
3. Close all the doors (trunk and hood if open as well), lock the vehicle, and wait 10-15 seconds. After this period, start up the car and turn on the lights to check for the error message.
This is a strange procedure to do, but what we have found in the past is that it does work out well for majority of the vehicles we’ve dealt with. If the troubleshoot above still does not work, please search on the Internet for solutions.
https://www.esd-electronics-usa.com/CAN-Bus-Troubleshooting-Guide.html
Please make sure your car supports these type of bulbs before purchasing. If your car does not support canbus error free bulbs, you can return the bulbs for a full refund, but we are not responsible for return cost.
Package include:
2 x 1157 18 SMD LED Bulbs