>>>> NEW GENERATION OF 8-INCH KEY PROGRAMMING TOOL WITH HIGH CONFIGURATION & SUPER PERFORMANCE - 2 YEARS FREE UPDATE

As a standard anti-theft feature, a car immobilizer system can dramatically minimize the likelihood of your automobile being stolen when it functions properly. If you lose/damage your keys, you can always order a replacement from the manufacturer but this could take some time and more money - time you may not have. This is where LAUNCH IMMO PLUS comes in. More situations could be solved by LAUNCH X431 IMMO PLUS.

• Add new keys for the used cars
• Clear the E.CU data of the lost key
• Change the broken IMMO E.CU module
• Reset the replaced IMMO E.CU
• Read PIN Code: This LAUNCH scan tool can scan the vehicle IMMO PIN code when all keys are lost. Compatible with Peugeot Citroen, GM, Nissan, Hyundai, Kia, etc.
• Key De-lete/Add/All Lost: LAUNCH IMMO PLUS empowers you to de-lete key information, add new keys, and handle all key lost.
• Key Learning/Matching: Read key data to E.CU module and reset/match the new key with IMMO E.CU. Compatible with Ford, GM, Mercedes-Benz, BMW, VW/Au-di, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, etc.
• Module Data Wiping: Clear key module information & data for matching new keys.
• Module Replacement: Compatible with BMW, Mercedes-Benz, VW/Au-di, Honda, Nissan, Hyundai, Kia, etc
• IMMO E.CU Reset: Reset the E.CU with vehicle after replacement or repair.
• E.CU Clone for Engine & Gearbox: E.CU clone can solve problems that coding functions (programming, initialization, anti-theft matching) cannot solve during module replacement. Up to 5000+ vehicle models are available. this clone function can clone/backup original vehicle data to the new module and directly finish replacement & use.

Powerful Functions are Provided by Key Programming Tool with X431 PROG3 Key programming tool

Work With X-PROG 3 For Further Extended Programming Capacibility

In order to get a new key, an experienced lo-cksmith together with LAUNCH IMMO PLUS programming tool can offer programming services chips/remote key fobs/transponder to perfectly match the settings of your car.

LAUNCH IMMO PLUS programming tool also has access to manufacturer's pin codes that 100% meet the preset specifications set by the manufacturer. Especially working with the X-PROG3 Immobilizer & Key programming tool, LAUNCH IMMO PLUS enables key chip reading & matching, key generation, E.CU clone, etc., to be easily and effectively.

Advantages of PROG 3 programming tool Brings for LAUNCH IMMO Key Programming Tool

• Engine E.CU Module Clone & Replacement ( for 5000+ Models)
• Gearbox E.CU Module Clone & Replacement ( for 5000+ Models)
• Remote Control Matching / Key Generation / Key Learning
• Read/Write Key EEPROM, MCU, Engine, Immobilizer
• Backup & Restore Bosch/Siemens Engine E.CU Programming Data
• VW & Au-di Key Learning/All Lost
• 5th-Gen. Au-di (0AW/0B5) Gearbox E.CU Replacement
• 5th-Gen. VW UDS engine E.CU Reading, Writing & Clone
• Mercedes-Benz Key Adding/All Lost
• Mercedes-Benz IMMO E.CU Data Wiping
• Mercedes-Benz Infrared Key Reading/Writing
• BMW Key Adding/All Lost; E.CU Replacement
• BMW E chassis 8HP Gearbox E.CU Data Wiping
• Porsche Key Adding/All Lost; E.CU Replacement
• Read BMW Engine INS Code

>>>> ALL-IN-ONE SCANNER - SAVING MAINTENANCE TIME AND MONEY FOR YOU

LAUNCH X431 IMMO PLUS diagnostic tool for all cars features advanced coding functions to meet personalized needs. E.CU coding is a process to code your vehicle modules and modify codes to activate many functions, which is widely applied to modern auto repair to solve module replacement, retrofitting, calibration, personalization, etc.

• E.CU Online Coding:

LAUNCH X431 scanner provides an access to get more OEM codes for BMW, Benz (SCN coding), VW, Skoda, Seat, etc.

• Component Matching:

After replacing the vehicle components, LAUNCH automotive scanner can help quickly write adaptive code data into the replaced module/component to make it work properly with other vehicle modules

• Personalization:

Have you ever been annoyed by the noisy seat belt chime when igniting the engine? Do you want to change your daytime running lights? Do you need to activate courtesy light? LAUNCH IMMO scan tool could make it come true by modifying the codes. More applications include deactivating the auto start-stop; customizing the color of interior lights; automatic mirror folding and unfolding; etc.

• Variant Coding/Offline Proframming:

Variant coding involves adjusting or customizing the software or firmware of a vehicle to cater to diverse needs, such as different car models, engine types, configurations, and more. IMMO PLUS enhances accurate communication with various vehicles, retrieves relevant data, and offers diagnostics and solutions tailored to specific car models.

It may help do Transmission Calibration, Fuel Injection Mapping, Electric Vehicle Modes, Airbag Deployment, Chassis Control, Powertrain Optimization, Infotainment Configuration etc.

• Retrofitting:

This function allows you to install or change new modules to upgrade a vehicle such as Installing Fog Lights, Retrofitting Headlamps, etc.

Note: E.CU Coding is NOT universally compatible with all models. Please check the compatibility.

>>>> PERFORM 39+ COMMONLY-USED MAINTENANCE FUNCTIONS [CONTINUOUSLY GROWING WITH UPDATES]

LAUNCH X431 IMMO PLUS combines advanced IMMO functions and 39+ maintenance functions that every mechanic needs for daily repair. Whether it's a repair shop or a lo-cksmith, this LAUNCH diagnostic tool can help you in improving efficiency and increasing incomes ranging from 1996-2024 global main vehicle models.

• Oil Maintenance Reset: Reset the oil life system and turn off the oil light to start a new cycle.
• Brake Reset: You can use the LAUNCH X431 car scanner to reset the brake pad in the following cases: a) the brake pad and brake pad sensor are replaced; b) the brake pad indicator lamp is on; c) the brake pad sensor circuit is in short-circuit; etc.
• Immobilizer Reset: Disable the lost k~eys and add new k~eys & remote control for vehicles with low-grade anti-theft systems.
• Steering Angle Reset: Reset the steering angle to zero to keep the car running straight.
• TPMS Reset Database: Relearn the tire pressure sensor ID with the vehicle after replacement.
• Battery Matching: Re-match the battery control module and motoring sensor.
• Air / Fuel Reset: Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
• NOX Sensor Reset: Reset catalytic converter learned value stored in E.CU.

AC System Relearn, Headlamp, AdBlue Reset, Air Level Calibration, Coolant Bleeding, Crank Position Sensor Adaptive Learning, Engine Power Balance, GPF Regeneration, Gearbox Relearn, HV Battery Diagnostics, IMMO Programming, Injector Coding, Intelligent Cruise Control System, Language Change, Motor Angle Calibration, Seat Occupancy Calibration, Stop/Start Reset, Sunroof Reset, Tire Reset, Transport Mode, Windows Calibration, Clutch Matching, Turbocharging Matching, Gateway Module Data Calibration, E.CU Reset, Rainfall Light Sensor, etc.

Note: More functions & model compatibility will be updated later. Function menus vary by manufacturer, year, and model. (*Explore more service functions by accessing menus of “Vehicle Brand -> System Diagnostics -> Special Function”.) You can message us to check compatibility first.

>>>> PROVIDE THE BIDIRECTIONAL CAPABILITIES FOR TESTING COMPONENTS + OE-LEVEL ALL SYSTEM DIAGNOSES

LAUNCH IMMO PLUS diagnostic scan tool will give you in-depth access to all available systems including Engine, ABS, SRS, Transmission, TPMS, Body, Network, SAS, EPB, Chassis system, etc. This LAUNCH scanner works with fault codes, live data stream, active tests to fully assist vehicle problem-solving for a wide range of vehicle models.

All Systems Diagnostics: This LAUNCH scanner quickly scans all available systems and performs comprehensive diagnostics:

• Retrieve E.CU information of unit type, version number, and other specifications.
• Read/Erase DTCs to pinpoint problems and clear trouble codes.
• View live data to react real-time status of vehicles and potential problems.

Bidirectional Control (Active Test): Various active tests will be used to accurately figure out whether a specific system, component, or subsystem in certain parts goes well or not, without using the vehicle controls. The technicians don’t need to disassemble the car into parts to detect the problem and minimize your diagnostic time.

For example, if you get a shift solenoid-related code, you can access the AT module and test each shift solenoid to determine which one is faulty. Such tests may also include relay or switch, between two operating states. Available tests vary by vehicle.

• Turn on the radiator fan
• Modulate the throttle
• Open/close windows
• Operate mirrors
• Turn on/off the lights
• Turn on/off the sound horn
• Compression test
• Turn on/off the cooling fan
• ...

>>>Active tests vary by model. You can check compatibility by messaging us.