【The Strongest Swingset Brackets】 Made of heavy-duty steel, 100% welded joints, stronger and more durable than spot welds. Green powder coating can effectively prevent corrosion and rust for a good looking swing set frame.
【What You Get】 2 DIY A-Frame swing set kits and all the hardware needed to install both swing set brackets (28 – 5/16" x 3" zinc-coated steel lag bolts and 28 – washers). Lumber is not included.
【How to Be Safer】 Make your own strong swing by swing bracket. If you still have some worries, you can use anchors to secure swing to the ground as there was some movement when kids were at the peak of their swinging.
【Easy to Install】 One tip would be to set up the 4x4 legs first into the brackets with the beam and then stick the 4x4 legs in on one side and the other, and drill the holes and screw them. Also you could add a 2x4 cross piece on the legs for added stability.
【Suitable Size】 The top beam is 4x6 and the side support legs are 4x4. Note: the lumber you buy will probably need to be shaved a little to fit in the bracket since a pressure treated piece of lumber will either swell or shrink depending on moisture content. You can use a rubber mallet or a small chisel to take down the corners and both methods worked just fine.