800W 946 Microcomputer Electric Hot Plate Preheat Soldering Preheating Station

Description

Our microcomputer electric hot plate has a high power of 800 W, which allows for efficient heating and increases your productivity. Two temperature settings provide you with different operating modes to suit your work requirements. The heating plate is also designed with a wrap-around edge and anti-static design to provide you with a higher level of safety.

Key Features

Sturdy and Durable: The product is mainly made of aerospace aluminum and high-quality aluminum alloy heating plate and has a brushed and baked surface, which is characterized by high hardness, high-temperature resistance, and strong pressure resistance.

Thoughtful Design: The four-sided structure and non-slip feet not only provide greater stability but also protect the bottom of the product and the table from wear and tear.

High Efficiency: The 800W power and the multi-tube heating ensure efficient heating and good heat transfer.

Easy to Use: The digital temperature display and one-touch switch allow you to control the temperature and operate it intuitively and accurately. Even novices can quickly learn how to use it.

Precise and Stable Temperature Control: The micro-computerized temperature control design, the sensor closed loop PID control and the built-in temperature sensor make for precise temperature regulation. The special heater and aluminum alloy heating plate also allow for a more even temperature distribution on the panel surface.

Safety Protection: The heater plate is wrapped around the edge to prevent you from being accidentally burned during use. The aluminum alloy heating plate is also anti-static, providing you with a higher level of safety.

Multi-functionality: The two temperature settings (normal and instant) provide you with different operating modes to meet your different working requirements.

Installation-free: The integrated construction of the product allows you to use it directly after receipt, saving you the effort and time of installation.

Details

Heat Dissipation Holes: The multi-angle heat dissipation holes ensure the smooth and efficient operation of the built-in heat pipes.

Clear Function Markings: The clear function markings on the operation panel help you operate more accurately.

How to Set

Temperature General Setting:

Press and hold the * key for more than 1 second to enter the temperature setting mode, and press the * key again to switch the number of digits of the temperature value to be set, and to set by the raise or lower temperature key.

Temperature Instant Setting:

In the constant temperature state of the heating table, directly press the key to raise or lower the temperature to adjust the current working temperature by ±50℃.

Application

This product can be used for reflow soldering and preheating of some circuit boards and other processes that require overall uniform heating. It can be used for splitting, repairing cell phone screens, LED displays, component work, PCB dismantling, soldering work, component heating work, SMD rebuilding work (demolition, welding applicable temperature: 428~500℉), packaging box plastic sealing hot film work, etc. and widely used in biology, electronics industry, medical research work.

Specification

Material: Aerospace Aluminum, Aluminum Alloy

Color: Blue

Process: Brushed, Baked

Assembly Required: No

Plug Size: US Standard

Input:110V AC 50/60Hz

Power: 800W

Constant Temp Stability: ±1.5℃/34.7℉

Temperature Range: Room Temperature~350℃/662℉

Temperature Display: Three Digits (Display Resolution: 1℃/33.8℉)

Display Mode: HD LCD Digital Display

Gross Weight: 3.5kg/ 7.7 lbs

 Product Size: 20*20*20 cm/ 7.8*7.8*7.8in

 Package Size: 28*28*22 cm/ 11*11*8.66in

Package Included

1 * Microcomputer Electric Hot Plate

1 * Chinese and English Manual

1 * Power Cord

Notes

• Please connect the ground wire before use.
• The temperature of the heating plate is very high, please avoid scalding.
• Please do not put it near flammable objects.
• The ventilation window on the housing must not be blocked by objects to avoid affecting its heat dissipation effect.
• Metal objects cannot be put into the ventilation window to avoid electric shock.
• As the heating table is a machined product, it is normal that the residual oil in the screw hole will evaporate white smoke and odor after heating, and this phenomenon will disappear after using for a period of time.
• Please do not change the internal parameter settings without permission.
• The table surface of the heating table should be flat and the material must be heat resistant.
• If you need to move or touch the machine, please remember to cut off the power and wait for the heating plate to cool completely to room temperature.
• This machine is a high-temperature electric heating product, please remember to cut off the power supply to avoid danger and accidents if you are not using the machine.
• In order to prolong the life of the heater and the machine, it is prohibited to use the machine for a long time at high temperatures (above 572℉). Generally, the machine should not be operated continuously for more than eight hours.
• Please do not let the airflow blow directly on the plate surface, otherwise, it will affect the heating of the heater.
• The heating temperature may exceed the user setting temperature of 37.4-41℉ when the machine is first turned on, and the temperature drops to the setting temperature after a few minutes. This feature improves the temperature uniformity of the heating table.
• The device will make a crunching sound when used, which is caused by the heat pipe thermal expansion and contraction rubbing against the mounting hole wall and pressure plate. Please feel free to use the product as it is not dangerous.
• Products with electrical plugs are designed for use in the US. Please check compatibility before purchasing.
• Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
• Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.