Senninger Pressure Regulator
These are Senninger In-Line Pressure Regulators.
If you need more than listed contact us.
Options:
  • Flow (Low Flow, Medium Flow, High Flow)
  • Pressure Rating (6, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 PSI)
  • Size (3/4" FPT, 1" FPT, 1-1/4" FPT)
 
Specs:
  • Low Flow: 0.1 - 8 GPM (6 & 10 PSI 0.5 - 5 GPM)
  • Medium Flow: 2 - 20 GPM (6 & 10 PSI 4 - 16 GPM)
  • High Flow: 10-32 GPM (1-1/4" inlet 1" outlet)
  • Can be installed above or below ground
  • Withstands severe water hammer
  • Very low hysteresis and friction losses
  • 100% water tested for accuracy (no adjustments ever needed)
  • Built for strength and durability using high-impact engineering-grade thermoplastics and top quality stainless steel components
  • Maintains a constant preset outlet pressure while handling varying inlet pressures
  • We stock most pressure ratings listed, but may have to direct ship if not in inventory
  • Two-year warranty on materials, workmanship, and performance.


These regulators are used to reduce incomming pressure from main lines down to a desired working pressure for laterals lines and emission devices to increase uniformity throughout the system and protect the system from high pressures. These will regulate the pressure down to the pre-set pressure as long as you are inside the designated flow range of the regulating unit.  These are great for low-volume irrigation systems in orchards, nurseries, turf, greenhouses, and gardens, as well as center pivot and other mechanical move systems.  6-15 PSI is good for low pressure systems like; drip tape and spray stakes.  20-40 PSI is good for jets, PC drip hose, PC emitters, micro sprinklers, and sprinklers. 

Let us know what you would like to see in our store.

Thanks For visiting our Irrigation-Mart E-store.

800 SAY-RAIN