PRODUCT INFORMATION

Our stainless steel Pan-Ring burner kits come complete with everything you need to start your outdoor fire pit project! 

We start with 304 stainless steel flat pan and a burner so your burner kit will last in the outdoors. The burner tubes are inserted into the adjoining tube then welded for unrestricted gas flow. All of our flame holes are precission drilled not punched so there are no tabs pushed inside restricting gas flow. By using our stainless-steel Burner Pan-Rings with our stainless-steel burner rings mounted on a stainless steel pan you have a corrosive resistant protective solid flat surface to work with. Best of all you can pour our fire glass crystals over the top of the pan-ring and it will not sift its way down into your lava rocks or other media.

Check out our 36" HC (High Capacity) model! This HC kit includes all 3/4" fittings and connections instead of standard 1/2"!ds

Our connection kit is assembled using matching components to assure the best performance i.e. the right sized Non-Whistle flex line and high-flow keyed main shut off ball valve. All this adds up to exactly what you are looking for; the highest possible flames. Please note, your incoming gas line size needs to be matched to the size of your burner. On average you will need a half-inch line for 18, 22, 24, 28, 30-inch pan-rings. The 36-inch pans will most likely require a three-quarter inch gas line. These are general guidelines only, you will need to consult your installer for the exact size of line needed. 

The correct gas pressure is measured in “inches of water column” The correct reading is: Natural Gas (NG) 3.5- 7.0 inches of water column supply pressure and 3.5-5.0 inches manifold pressure. Liquid Propane (LP) 8.0-15.0 inches of water column supply pressure and 12.0-12.0 inches of water column outlet pressure. 

We always recommend that gas products be installed and serviced by professionals certified by the NFI or WETT to conform to any and all State and/or local codes.

Features

• 304 stainless steel to last long
• Precission drilled flame holes, not stamped
• Corrosion resistant design
• Works great with our full spectrum fire glass
• Everything you need included!

Specifications

• Available in 18", 22", 30", 36" diameter
• 1/2" NPT connection hub
• 36" HC/High Capacity kit includes all 3/4" fittings and connections instead of standard 1/2"
• 200,000 BTU max
• Liquid propane and natural kits both available

Package Contents

• Burner and burner pan
• 1/2" NPT connection Hub (3/4" on HC model)
• Keyed Chrome Shutoff valve
• NonWhistle flex line
• Connection Fittings