eBay

Help	Property	Value
Marking code found on Littelfuse IEC rated 5x20mm fuse caps.	IEC Marking	T500mAH250V
It is established by Littelfuse as a value of current which the fuse, fuseholder, fuse clip or other fuse accessory can carry, based on a controlled set of test conditions.	Ampere Rating (A)	0.5
The maximum rms AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings.	VAC (V)	250
Package Size/Form Factor	Package Size	5x20mm
Refers to how rapidly the fuse responds to various current overloads. Fuse characteristics can be classified into three general categories: very fast-acting, fast-acting or Slo-Blo® (time delay)fuse. The distinguishing feature of Slo-Blo fuses is that these fuses have additional thermal inertia (surge withstand) designed to tolerate normal initial or start-up overload pulse.	Opening	Slo-Blo®/Time Lag (T)/Time Delay
RMS Surge (Non-repetitive) On-state Fusing Current- Measure of let-through energy in terms of current and time for fusing purposes.	Nominal Melting I²T (A²sec)	0.42
Cold resistance is the resistance obtained using a measuring current of no more than 10% of the fuse's nominal rated current. The factory should be consulted if this parameter is critical to the design in question.	Nominal Cold Resistance (Ohms)	1.1675
	Interrupt Rating	1500A at 250VAC
Nominal Power Dissipation (W)	Nominal Power Dissipation (W)	1.6
Nominal Voltage Drop (mV)	Nominal Voltage Drop (mV)	850
Color or Alpha-Numeric code used to define the amp rating of the device for ease-of-maintenance and quality checks.	Marking Code	VX

You are ordering:
1 PACKET OF 10 (ten 0.5A FUSES) T500mAH250V CERAMIC 5x20mm

TIME LAG (SLO-BLO®) FUSES BY LITTLEFUSE

This fuse (known as 215 series) measures 5x20mm, has a Ceramic body and is a Time-Lag type Cartridge fuse.

The 215 Series has remarkable interrupting capability at operating voltage of 250VAC.

It can be used in AC applications, and it provides a smaller footprint of 5 x 20mm as compared to 6.3 x 32mm for same applications.

Features

Provide remarkable interrupting capacity
UL agency approval
Quantity: 10 (ten)

Applications

Primary and Secondary protection for White Goods, UPS/Power Supplies, High current applications

Electrical Characteristics

Help Property Value

Marking code found on Littelfuse IEC rated 5x20mm fuse caps.
IEC Marking T500mAH250V

It is established by Littelfuse as a value of current which the fuse, fuseholder, fuse clip or other fuse accessory can carry, based on a controlled set of test conditions.
Ampere Rating (A) 0.5

The maximum rms AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings.
VAC (V) 250

Package Size/Form Factor
Package Size 5x20mm

Refers to how rapidly the fuse responds to various current overloads. Fuse characteristics can be classified into three general categories: very fast-acting, fast-acting or Slo-Blo® (time delay)fuse. The distinguishing feature of Slo-Blo fuses is that these fuses have additional thermal inertia (surge withstand) designed to tolerate normal initial or start-up overload pulse.
Opening Slo-Blo®/Time Lag (T)/Time Delay

RMS Surge (Non-repetitive) On-state Fusing Current- Measure of let-through energy in terms of current and time for fusing purposes.
Nominal Melting I²T (A²sec) 0.42

Cold resistance is the resistance obtained using a measuring current of no more than 10% of the fuse's nominal rated current. The factory should be consulted if this parameter is critical to the design in question.
Nominal Cold Resistance (Ohms) 1.1675

Interrupt Rating 1500A at 250VAC

Nominal Power Dissipation (W)
Nominal Power Dissipation (W) 1.6

Nominal Voltage Drop (mV)
Nominal Voltage Drop (mV) 850

Color or Alpha-Numeric code used to define the amp rating of the device for ease-of-maintenance and quality checks.
Marking Code VX

n.b. ALL dimensions are approximate

*******************

FOR MORE BARGAINS AND INTERESTING ITEMS, PLEASE VISIT OUR STORE FOR A BROWSE AROUND:

LOVELIFE3BAY

3L

Lovelife3BAY sell quality home improvement products electrical fuses lighting DIY Motorcycle seat cover repair kits architectural furniture lock window door handle hinges brackets brass chrome finishes mesh aluminium upvc pvc insect screen buttons toe-socks plastic electronic plug adapters and fishing tackle.

For multiple purchases, a COMBINED POSTAGE INVOICE should be sent automatically.

If you are happy with the invoice please feel free to proceed with payment. If it doesn't happen automatically or there is ANY issue with the automatic invoice, PLEASE WAIT to receive an invoice or contact us BEFORE you make payment.

There are always ways of improving the service quality, and we endeavour to continually improve, so please feel free to tell us how we can. Thank you for your time to read this.

Our shipping charge includes:

· collection service to ensure post is collected virtually EVERY working day

· packaging materials

· postage/ delivery/ courier

*******************