You are ordering: 

2 x BRAND NEW HOTPOINT/CREDA/INDESIT/PROLINE ELECTRIC WASHING MACHINE

MOTOR BEARING.

 

Inner diameter 12mm

Outer diameter 28mm

Depth 8mm

QUANTITY 2 (a set/pair for one motor)

 

These bearings are for the electric motor in your washing machine, washer dryer or tumble dryer.

 

There are 2 bearing sizes depending upon what brand of motor was fitted on the production line, 28mm diameter (this listing) and larger 32mm. We can supply either at the same price but this listing is for 2 of the 28mm outer diameter bearings. The 32mm bearing is available as a pair HERE.

 

This bearing is 32mm OUTER DIAMETER for the electric motor in your washing machine, washer dryer or tumble dryer.

 

A seized or worn bearing is often all that is wrong with your motor if your machine repeatedly causes a trip in your control panel, or if the synchronising magnet (on the inner end of the motor shaft) slips (causing your machine to jump about as if it was alive.

This can be caused by the heat in the bearing melting the magnet mounting causing it to slip on its holding screw.

Rather than spend over £100 on a new motor, it's possible to replace the bearing/s and a LOT easier than replacing the bearing on your drum, a task that some DIYers do by themselves!!

 

These bearings are for the electric motor in your washing machine / washer dryer / tumble dryer.

 

As they tend not to get corroded like your drum bearings, it is unlikely that both bearings will be gone but no harm replacing them both if you're taking the motor out anyway. We do sell them separately in a different listing HERE if you only need one (no harm in keeping one for spare though?).

 

They are not particularly easy to fit, you may have to grind the old  bearing sleeve off as it's difficult to find small enough pullers to do the job. One has to take great care not to damage the shaft, we recommend you do the last 0.25mm with a hand file.

 

It is difficult to keep the model list up to date on the listing as the manufacturers keep on releasing new models. If they're not the correct ones for your machine, we'll be happy to pay your return postage costs (large letter) as well as a full 100% refund on their return, so you really have nothing to loose.

 

THIS BEARING FITS MOST MOTORS WHICH DRIVE THE FOLLOWING:

WASHING MACHINES / WASHER DRYERS

HOTPOINT

model numbers

1824, 1827, 1828/01, 1828/02, 1828/07, 18331, 18331/9, 18340, 18361, 18370, 18371, 18380, 18381, 1842, 1848, 1850, 1851, 1851/03, 1852, 18580, 18680, 18780, 18871, 18872, 18873, 18880, 6240B, 6240P, 9506W, 9510A, 9510W, 9511W, 9512W, 95130, 95132, 9513W, 9514A, 9514W, 9515A, 9515W, 9516A, 9516P, 9516W, 9517P, 9517W, 9518P, 9518W, 9519W, 9520A, 9520W, 9524A, 9524W, 9525A, 9525W, 9525WE, 9526A, 9526P, 9526PE, 9526W, 9527A, 9527P, 9527W, 9528A, 9528P, 9528W, 9529A, 9529P, 9529W, 9530A, 9530W, 9531W, 9533P, 9533W, 9534A, 9534P, 9534W, 9535A, 9535P, 9535W, 95360, 95362, 9536A, 9536P, 9536PX, 9536W, 9536WX, 9537A, 9537P, 9537PE, 9537W, 9538A, 9538P, 9538PE, 9538PF, 9538W, 9539A, 9539P, 9539W, 9540A, 9540P, 9540W, 9544A, 9544P, 9544W, 95450, 95452, 9545A, 9545P, 9545PE, 9545W, 9546A, 9546P, 9546PE, 9546W, 95470, 95472, 95490, 95492, 9549A, 9549P, 9549W, 9550A, 9550W, 9551A, 9551W, 9554A, 9554P, 9554W, 9555A, 9555P, 9555W, 9556A, 9556P, 9556W, 9559A, 9559P, 9559W, 9560A, 9560P, 9560W, 9561A, 9561P, 9561W, 95620, 95622, 9564A, 9564P, 9564W, 9565A, 9565P, 9565W, 9566A, 9566P, 9566PE, 9566W, 9567A, 9567P, 9567PE, 9567PX, 9567W, 9569A, 9569P, 9569W, 9570W, 9571A, 9572W, 9573W, 9574P, 9574W, 9575W, 9576W, 9577A, 9577P, 9577W, 9578P, 95840, 95842, 9585B, 9585P, 9586B, 9586P, 9589B, 9589P, 9770P, 9773P, 9774P, 9775A, 9775W, 9776A, 9776P, 9777P, 9900A, 9900W, 9901A, 9901P, 9901W, 9912P, 9912W, 9916P, 9916W, 9920A, 9920W, 9924A, 9924W, 9925A, 9925P, 9925W, 9926A, 9926P, 9926W, 9928A, 9928P, 9928W, 9934A, 9934P, 9934W, 9935A, 9935P, 9935W, 9936A, 9936P, 9936PE, 9936W, 9938A, 9938P, 9938W, 9945A, 9945P, 9945W, 9946A, 9946P, 9946W, 9949A, 9949P, 9949W, 9970A, 9970W, 9971A, 9971W, 9972A, 9972P, 9972W, 9985B, 9985P, 9986B, 9986P, 9989B, 9989P, BW61B, BW61P, WD21P, WD22A, WD22P, WD22W, WD23A, WD23P, WD23W, WD31A, WD31P, WD31W, WD32A, WD32P, WD32W, WD41A, WD41P, WD41W, WD42B, WD42P, WD43A, WD43P, WD43W, WD51A, WD51P, WD51W, WD61H, WD61N, WD61P, WD61S, WD61T, WD61U, WD61X, WD62N, WD62P, WD62S, WD62X, WD64N, WD64S, WD71N, WD71P, WD71S, WD71X, WD71YS, WD72S, WDM73A, WM11P, WM11W, WM12A, WM12P, WM12W, WM13A, WM13P, WM13W, WM14A, WM14P, WM14W, WM19P, WM20A, WM20P, WM20W, WM21P, WM21W, WM22A, WM22P, WM22W, WM23A, WM23P, WM23W, WM24A, WM24P, WM24W, WM25A, WM25P, WM25W, WM26A, WM26P, WM26W, WM29P, WM31A, WM31P, WM31W, WM32A, WM32P, WM32W, WM33A, WM33P, WM33W, WM34A, WM34P, WM34W, WM35A, WM35P, WM35W, WM36A, WM36P, WM36W, WM38P, WM41A, WM41P, WM41W, WM42B, WM42P, WM43A, WM43P, WM43W, WM60PE, WM61PE, WM62PE, WM63PE, WM63XE, WM64PE, WM71N, WM71P, WM71X, WM72N, WM72P, WM72X, WM73N, WM73P, WM73X, WM74N, WM74P, WM74S, WM75N, WM75P, WM75S, WM76N, WM76P, WM76S

CREDA 

17027, 17028, 17029, 17030, 17037, 17038, 17039, 17040, 17041, 17043E, 17044E, 17045, 17047E, 17048, 17049, 17071E, 17072E, 17076, 17077, 17078, 17079, 17080, 17081, 17083E, 17084E, 17085, 17086, 17087, 17088G, 17094E, 17095E, 17096E, 17098E, 17110, 17111, 17112E, 17112G, 17113G, 17113X, 17120, 17121E, 17343E, 17345, 17345E, 17346X, 17390E, 47305, 47306, 47307, 47308, W1200, WD1200, T522VW+many more

TUMBLE DRYERS

fits motor no: C00095993 equivalent part no: 1702533 Ariston A35V(EX)PAI A35VEXPAI AS60VAG AS60VXAUS A35VEX A36VEX AS60VEX ASL60VEX A35VEX60 A36VSK AS60VEXPAI IS30V A35VEXAUS ALE60VXFR AS60VSK Hotpoint TCM580 ISA60VFR TDL34S TS14P VTD00T TDL14P TDL52N TVM35A VTD20G TDL15P TDL52P TCM580P TVM55A VTD20P TDL32N TDL52S VTD20T TDL32P TDL54N VTD60G TDL32S TDL54P V3D00P VTD60P TDL34N TDL54S VTD00G VTD60T TDL34P TS13P VTD00P VTD65A Proline TDV60 TDV62 Creda    37294  TVR2  TVS3  T400VW  TVU1  37295  37304610BL  37308  37309  37316  37333  373450001Q  37371  37372  37373  37374  37374Y  37375  37376  37377  37378  37381  37382  37455M001Q  37462M001Q  37481  37482M001Q  37483M001Q  37485  37487E  37489  37494  375410001Q  37541V  37542M001Q  37543M001Q  37544M001Q  37545M001Q  37546M001Q  37548  37549  375570001Q  37565E  37566E  37567E  37635  37636E  37640  37641  37642  37643  37644  37645E  37646E  37649  37650  37651  37652  37653E  37654G  37655  37656  37657  37658  37660  37670  37734I  37740  37742  37743  37745E  37746E  37750  37751  37752  37753E  37760  37761  37762E  37762G  37763X  37766E  37770  37771  37772E  37773X  CDV252  CLS00W  T301IS  T301UWE  T310VW  T312VW  T320VW  T322VW  T510VW  T511VW  T512VW  T520VW  T521VW  T522VW  T530VW  T532VW  TDL11PE  TDL30IS  TDL30PE  TDL30PI  TDL31PE  TR11  TR12  TR6  TR7  TRE11  TRS11  TU11  TU12  TU6  TU7 Indesit G31VU G74VEX IS60V ISA60VUK G32V G74VEXPAI IS60VEX ISL60V G32VS G74VFR IS60VEXPAI ISL60VEX G73V G74VNL IS60VFR ISL60VNL G73VU G74VS IS60VNL ISL60VSK G73VUEX G74VSK IS60VS G74EXPAI IS60VSK G74V   G75CS  IS60VU IDV65

Unfortunately, there is more than one motor manufacturer /supplier for the type 358 motor and whilst the motors are interchangeable as complete units, they are not the same w. .t bearings and internal components etc.

As well as many more motors, these bearings fit:

Most type 358 Indesit Group Motors but there are 2 bearing sizes, 32mm diameter and 28. We can supply either at the same price but this listing is for the 28mm outer diameter bearing. The 32 mm bearing is available in a separate listing HERE

ALL 904/1158/** motors ((electronic speed control 800/15000 rpm (** is the variable year code)).

There are 2 different motors (see photos) on these machines above. If in doubt, check the diameters of the MOTOR shaft and the bearing outer casing / shell, if the dimensions are 12mm, and 28mm respectively, these are the correct bearings for you. If the dimensions are 12mm and 32mm respectively, then buy your bearings from HERE.

If they're not the correct ones for your machine, normally, we send the other (32mm) bearings immediately along with an SAE for you to pop the wrong ones in the post back to us.

However, if preferred, we're be happy to pay your return postage costs (large letter) as well as a full 100% refund on their return.