This kit is to fit Turbo oil Line/Fitting for 1JZ/2JZ Twin Turbo to Single Turbo .
Factory 1JZ or 2JZ-GTE is twin turbo, Many 1JZ or 2JZ-GTE Single Turbo Need to change the oil line setup and this kit is exactly what it is needed for Single turbo application.
This kit Comes with:
- 1x AN10 Aluminum Oil drain return Flange that bolts to the Block
- 1x AN10 Aluminum Oil drain return Flange that bolts to Turbo ( 2-Hole-Centerline Distance=51mm or 2") works for many turbos.
- 1x AN4 Aluminum Oil feed Flange (with Oil Restrictor Built in) that bolts to the Turbo (2-Hole-Centerline Distance=38mm or 1.5") works for many turbos.
- 1x AN4 Aluminum Oil Feed Flange that bolts to the Block
(one of the 2 Factory Twin Turbo oil feeds, supplys oil to Turbo)
- 1x Cap Bolt that bolts to the Block
(seals one of the 2 Factory Twin Turbo oil feeds)
- 1x AN10 Braided Oil drain return Line
- 1x AN4 Braided Oil Feed Line. Female AN4 on both ends. with 90 Degree Elbow Connector
- 1 x AN10 45 Degree Fitting
- 1 x AN10 90 Degree Fitting
