TOA A9060S-CU Digital Matrix Mixer / Amplifier
Please Note: This is NOT the newer model A9060SM2
Power Source | 120 V AC, 60 Hz |
---|---|
Power Consumption | 100 W |
Audio Input | Max. 8 channels, modular construction (modules optional) Power amplifier input: 0 dB(*1), 10 kΩ, RCA pin jack |
Audio Output | Preamplifier output 1: 0 dB(*1), 300 Ω, unbalanced, RCA pin jack Preamplifier output 2: 0 dB(*1), 600 Ω, balanced, removable terminal block (3 pins) Speaker output: Removable terminal block (7 pins) (Direct) 60 W, 4 Ω, unbalanced (Transformer) 60 W, 8 Ω 25 V & 70 V, balanced |
Module Slot | Analog input (slot 1 - 8): -10 dB(*1), 10 kΩ, unbalanced Digital input (slot 1 - 4): 24 bit/48 kHz MIX output (slot 1 - 8): -14 dB(*1), 330 Ω (CH 1 prefader output), unbalanced Digital output (slot 5 - 7): 24 bit/48 kHz Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC |
Digital Audio Signal Reference Level | -20 dBFS |
Power Bandwidth | (Direct) 20 - 20k Hz, 0.02% THD (Transformer) 50 - 20k Hz, 0.5% THD |
Frequency Response | Power amplifier section: 20 - 20k Hz, +0, -1 dB Analog input module to speaker output: 20 - 20,000 Hz, +1, -3 dB |
Total Harmonic Distortion | Power amplifier section: 0.008% (22 kHz LPF, 1 kHz, rated power) Analog input module to speaker output: 0.008% (22 kHz LPF, 1 kHz, rated power) |
S/N Ratio | At Input short, 20 - 20,000 Hz, set to ALL FLAT or OFF setting Output volume min.: 90 dB (preamplifier output) Output volume max.: 61 dB (preamplifier output, Input 1 volume: 0 dB, Other Inputs: OFF) Power amplifier section: 110 dB |
Cross Talk | Over 64 dB (at 20 kHz) |
Tone Control | Bass: ±12 dB (at 100 Hz) Treble: ±12 dB (at 10 kHz) |
Parametric Equalizer | 10 bands, Frequency: 20 - 20k Hz, 31 steps, Variable range: ±12 dB, Q: 0.3 - 5 |
Speaker Equalizer | 15 (compatible with TOA speakers only) |
High-pass Filter | -12 dB/oct, Variable frequency range: 20 - 400 Hz, 14 steps |
Low-pass Filter | -12 dB/oct, Variable frequency range: 4k - 20k Hz, 8 steps |
Compressor | Depth: 1 - 5 |
Delay | 0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2), mixer mode only |
Scene/Event Memory | 32 |
Operation Mode | Matrix mode/Mixer mode (selector switch) |
Auxiliary Function | Key lock function |
Control Input/Output | RS-232C(*2), D-sub connector (9 P, female) Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC, short-circuit current: Under 1 mA, removable terminal block (14 pins) Control output: 4 outputs, open collector output, withstand voltage: 27 V DC, control current: 50 mA, removable terminal block (14 pins) Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or input the DC voltage of 0 to +10 V, removable terminal block (14 pins) |
Operating Temperature | -10℃ to +40℃ |
Operating Humidity | 35% to 80% RH (no condensation) |
Finish | Panel: Aluminum, hair-line, black Case: Surface-treated steel plate, black, paint |
Dimensions | 420 (W) × 107.6 (H) × 355 (D) mm |
Weight | 11 kg |
Accessory | Power cord (2 m) …1, Rack mounting bracket …2, Bracket mounting screw …4, Blank panel …7, Blank panel mounting screw …14, Removable terminal plug (3 pins) …1, Removable terminal plug (7 pins) …1, Removable terminal plug (14 pins) …1, CD-ROM …1, Start guide …1 |
FREE UPS Ground shipping charges to any address within the contiguous