E-Flite EFL2790 PA-20 Pacer 10e ARF AirPlane

E-Flite EFL2790 PA-20 Pacer 10e ARF AirPlane

The PA-20 Pacer was Piper’s answer to the four-seat family airplanes offered by Cessna and Stinson who were capitalizing on the post-war general aviation boom. Eager veterans used their G.I. bill to earn pilot certificates and needed a “family car of the air” for travel that the venerable J-3 Cub used in training simply could not accommodate. The E-flite® PA-20 Pacer 10e ARF airplane replicates the full-scale Pacer for RC pilots who want an iconic scale experience great for hopping out of small fields. Not only does its outline and color scheme closely honor the original, you also get high-end interior appointments, scale looking landing gear, plus optional flaps for greater control at a wider range of speeds. Even more satisfying is the short amount of time you’ll need for this classy lady to be flight-ready.

From the authenticity of its traditional construction to the richness of its UltraCote® finish and high-gloss fiberglass cowling, the E-flite PA-20 Pacer 10e ARF delivers a scale model with outstanding flight characteristics so that you can look like a class-act both in the air and on the ground. The recommended E-flite power system was designed around popular and economical 3S Li-Po batteries to provide great performance for scale maneuvers as well as picture perfect touch-n-gos.

Key Features

    Classic lines and highly accurate scale proportions
    Laser-cut balsa and plywood construction
    Genuine Hangar 9® UltraCote® covering
    Ready-to-mount the E-flite® Power 10 brushless motor
    Pre-painted fiberglass cowl and wheel pants
    Scale cockpit detail (pilot not included)
    Four-channel control with optional flaps
    Two-piece, plug-in wing with carbon fiber wing tube
    Scale wire landing gear assembly
    Large, easy-access belly hatch

Needed To Complete

- 4+ channel transmitter
- 4+ channel receiver
- (4) sub-micro servos, plus (2) sub-micro servos for optional flap operation
- 10-size brushless outrunner motor
- 40-amp brushless ESC
- Propeller
- Standard propeller hub or up to a 1.75-inch spinner
- Flight battery
- Charger for flight battery

Specs
CG (Center of Gravity):     2-3/16 to 2-3/4 in (55-70mm) back from the leading edge of wing
Control Throw (Ailerons):     Low: 11/32 in (9mm) up, 9/32 in (7mm) down, 15% expo; High: 15/32 in (12mm) up, 11/32 in (9mm) down, 25% expo
Control Throw (Elevator):     Low: 1/2 in (13mm) up/down, 20% expo; High: 25/32 in (20mm) up/down, 30% expo
Control Throw (Flaps):     Mid: 1/2 in (12mm); Full: 1 in (25mm)
Control Throw (Rudder):     Low: 11/16 in (17mm) right/left, 15% expo; 1 in (25mm) right/left, 25% expo
Experience Level:     Intermediate
Flaps:     Optional
Flying Weight:     46.4-48.0 oz (1300-1360 g)
Fuel Type:     Electric
Is Assembly Required:     Yes
Main Wing Tube Length:     395mm
Main Wing Tube OD:     9mm
Motor Size:     10-size brushless outrunner
Overall Length:     36.3 in (920mm)
Plane Type:     Scale Civilian
Power Plant Size:     10-15 Electric
Prop Size:     10 x 5 - 12 x 6 thin electric propeller
Radio:     4+ channel radio system
Recommended Environment:     Outdoor
Recommended Motor Battery:     11.1V 3S 1800-2200mAh LiPo
Retracts:     No
Servos:     (4) digital sub-micro servos required, (6) required for flap operation
Speed Control:     40-amp brushless
Spinner Size:     1-3/4 in (45mm)
Trim Scheme Colors:     UltraCote True Red (U866), Black (U874)
Wing Area:     451 sq. in. (29.1 sq. dm.)
Wingspan:     51.0 in (1300mm)