Description
KnuKonceptz Bassik Battery Terminal -
KnuKonceptz has engineered a simple design with a vast number of installation options available to the installer. The Bassik Battery Terminal uses button head screws for a low profile to fasten ring terminals of all types and gauges onto your battery! Up to 5, yes 5! (even 1/0 gauge) ring terminals can be secured using the Bassik Battery Terminal! Oh, so you prefer set screw ring terminals? Ok, it does that too! Three set screw ring terminals are easily accommodated. All these options are pleasantly hidden by the insulated color coded cover. .
Like all automotive battery terminals, the BK-BT are made to SAE specifications, which means that the positive and negative terminals are machined to different diameters. This is a reverse polarity safety feature so that installers can not tighten a negative terminal onto a positive battery post and cause serious damaged to vehicle electronics.
Additional Hardware Shown. Listing Includes:
Negative Battery Terminal with CoverSpecifications
Bassik Battery Terminal - Negative |
|
---|---|
Finish | Nickel Chrome |
Outputs |
3 Ring Terminal Ports - any gauge |
Dimensions |
1.775"(L) x 1.295"(W) x 0.935"(H) without cover 2.00"(L) x 2.20"(W) x 1.50"(H) with cover installed |
Warranty |
1 Year |
Insulated Cover Included |
Yes |
Additional Information
Simple Ring Terminals Connectivity
Why be limited to pre-drilled battery terminals? The Bassik terminal allows you to connect ANY gauge wire to you battery. Up to 5 crimp type terminals can be oriented safely on each terminal. Want to use KnuKonceptz Set Screw Terminals? Up to three neatly fit onto the Bassik Battery Terminal.
OEM Integration
Installing battery terminals into your car often can be daunting task because the OEM battery terminal normally needs to be cut off. For a car that is leased, that could be a big issue. Using the Bassik Battery Terminal and our top post adapter (sold separately), you can now take your factory battery cable and mount it directly onto the BK-BT.
Installation is simple, remove one of the side mounted pan head screws from the BK-BT(using the top mounted screw is OK too if you have clearance of the hood). Install the optional top post adapter, place the factory (OEM) battery terminal onto the top post adapter and tighten all screws. **Unfortunately the insulated cover can not be used with the top post adapter with out modification to the cover.