WHAT ARE HUB CENTRIC RINGS?

(Also called hubrings, hubcentric rings, centering rings)

This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.



WHY DO I NEED IT?

You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.



HOW CAN I CONFIRM FITMENT?

- Hubrings have 2 measurements, typically in millimeters (mm).

- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 71.5mm. This should match your vehicle's hub bore.

- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 74.1mm. This should match your wheel's centerbore.





[VEHICLE FITMENT]

Buyers MUST first ensure their Wheel Bore is 74.1mm. After confirming wheel bore is correct, below are the vehicles it can fit:

Compatible with Chrysler: 2004-2019 300, 1998-2004 300M, 1994-2001 LHS, 2004-2008 and 2016-2020 Pacifica, 1991-2000 and 2008-2020 Voyager

Compatible with Dodge: 2005-2008 Magnum, 1987-2004 Dakota, 1998-2003 and 2011-2020 Durango, 2009-2020 Journey, 1970-1974 and 2008-2020 Challenger, 2006-2020 Charger, 1987-2019 Grand Caravan

Compatible with Jeep: 1984-2013 Cherokee, 1993-2020 Grand Cherokee, 1987-2020 Wrangler, 2002-2013 Liberty, 1986-1992 Comanche, 2006-2010 Commander, 2019-2020 Gladiator





INSTALLATION ADVISORY

Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.

For Vehicles with 71.5mm Hub
AND
Wheels with 74.1mm Bore

  • StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.

  • HUB RING INNER DIAMETER: 71.5mm (Your vehicle's hub lip diameter needs be this size)

  • HUB RING OUTER DIAMETER: 74.1mm (Your wheel's center bore needs to be this size)

  • Compatible with Jeep Cherokee, Grand Cherokee WK WK2, Wrangler JT JK JL. Compatible with Jeep Liberty, Comanche, Commander XK, Gladiator JT. Compatible with Chrysler 2004-2021 300, 2004-2021 Pacifica, 1991-2021 Voyager. Compatible with Dodge 2005-2008 Magnum, 1987-2004 Dakota, 1998-2021 Durango. Compatible with Dodge 2008-2021 Challenger, 2006-2021 Charger, 1987-2020 Grand Caravan.

  • IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
Quantity 4 pieces
Inner Diameter
(Vehicle Hub Size)		 71.5mm
Outer Diameter
(Wheel Bore Size)		 74.1mm
Material Polycarbon Plastic
Color Black

FITMENT INFORMATION

Compatible with vehicles with a 71.5mm hub that needs to center a wheel with 74.1mm centerbore.

Please see eBay's Vehicle Compatibility Table for a list of applicable vehicles

Important Notes



	
	 If you are not sure the hub size of your vehicle, please send us an eBay message and we will be glad to help

	 Please Verify the measurement of your VEHICLE BORE AND WHEEL before purchasing

	 eBay's Parts Compatibility Chart above should only be used as a guideline.

Legal Information



NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility.
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.