NessElectronics, Since 1964
Hakko Model Number FX888D-23BY, our newest addition to the Hakko soldering station family. Included in this listing: Hakko FX888D power supply, FX-8801 Iron, FH800-03BY iron holder, A1559 sponge, A1561 cleaning wire, T18-D16, 1.6mm chisel tip. Bundled with this listing you will also receive the following chisel tips: T18-D08 (0.8mm), T18-D12 (1.2mm), T18-D24 (2.4mm), T18-D32 (3.2mm) & T18-S3 (13/64"). This is Hakko's most popular station, from the largest Authorized Hakko Distributor on eBay. Additional tips and accessories for this FX888 station are listed on eBay for your convenience as well. (Include additional items shown with this purchase and get additional discounts on those items). Buy today from nesselectronics, distributing Hakko products and accessories for over 25 years, selling on eBay for over 13 years! We are one of the top sellers of Hakko on eBay, please let us add you to our ever growing list of satisfied buyers.
Note: This is a 110/120 volt / 60Hz station. You must use a step down transformer if using with 220/240 volts. Using this station directly on 220/240 volts will damage the station and void the warranty.
SOLDERING STATION
The Hakko FX-888 is an inexpensive yet durable temperature adjustable soldering station that provides more power and takes up less bench space than its predecessor (Hakko 936).
The added power of the FX-888 provides up to a 30% increase in operator productivity due to the increased thermal performance and faster thermal recovery time. Today, workbench space is at a premium, and the FX-888 uses approximately 35% less surface area compared to the Hakko 936.
Other features include:
Feedback policy: We will give you positive feedback as soon as we process your order. You have done your part, now it is up to us to earn your positive feedback and 5 star DSR ratings. If you have questions or problems with your product once it arrives, please call us before leaving negative or neutral feedback to allow us the chance to correct any issues you may have.• adjustable temperature control
• temperature range 392°-896°F (200°- 480°C)
• maintains idle temperature within 1.8°F (1°C)
• ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery
• Celsius and Fahrenheit temperature display
• temperature adjusted by using the up/down digital keypad
• slender iron handles are padded and have an ergonomic design for comfort and ease of use
• wide selection of tips available for soldering SMD and through-hole applicationsPLEASE NOTE: THESE STATIONS HAVE BEEN TESTED AND CALIBRATED AT THE FACTORY SO THERE WILL BE SOME INDICATIONS OF HEATING ON THE SOLDERING PENCIL WHICH IS NORMAL.
Specifications
Model NameFX-888 Part NumberFX888D-23BY Power Consumption70W / 120VAC
STATION
Temperature 200°C - 480°C (392°F - 896°F) Temperature Stability ±1.0°C (1.8°F) Temperature Control Closed-loop sensor Outer Dimensions
100(W) x 120(H) x 130(D) mm
3.9(W) x 4.7(H) x 5.1(D) in.Weight (w/o cord) Approx. 1.3 kg (2.9 lbs) ESD Safe Yes APPROVED
SOLDERING IRON
Model Name FX-8801 Part Number FX8801-02 Power Consumption 65W / 26VAC Standard Tip T18-D16 Tip-to-Ground Resistance < 2 ohms Tip-to-Ground Potential < 2mV Heating Element Ceramic Hand piece Length 190mm (7.5 in.) Cord Length 1.2m (4 ft.) Weight (w/o cord) 44g (0.09 lb) CONTENTS
Description Part NumberStation N/ASoldering iron FX-8801Soldering iron tip T18-D16Iron holder FH800-01BYCleaning sponge A1559Tip cleaning wire A1561Calibration tool B3466NOTE: Station is ESD safe by design and meets or exceeds IPC J-STD-001E