Chrome plated with built-in mufflers, 2 1/4" I.D. inlet, 3" O.D. tubing, With mounting brackets
Patriot Exhaust H1060 Chrome Side Pipes w/Mufflers, 60 Inch, PR Patriot Exhaust H1060 Chrome Side Pipes w/Mufflers, 60 Inch, PR Patriot Exhaust H1060 Chrome Side Pipes w/Mufflers, 60 Inch, PR Patriot Exhaust H1060 Chrome Side Pipes w/Mufflers, 60 Inch, PR Patriot Exhaust H1060 Chrome Side Pipes w/Mufflers, 60 Inch, PR Patriot Exhaust
Patriot Exhaust H1060 Chrome Side Pipes w/Mufflers, 60 Inch, PR
Sku # 91013460
Mfr. Part # H1060
Condition
New
Brand
Patriot Exhaust
Sold
Pair
Details
Notes

These side exhausts come unassembled. The front portion with the 90 degree bend is chrome along with the rear turn out section. The center section is satin black finish and is expanded at one end and swedged at the other for assembly. The chrome plated heat shield clamps onto the center section which also houses the non-removable muffler/baffle assembly.

NOTE: Each measurement is taken from tip of elbow to exhaust tip. 

Info

Give your vehicle that custom look with a classic chrome shielded side exhaust system. Large chrome 2-1/4" I.D. inlet, 3" O.D. chrome outlet pipes and low back pressure six-sided louvered core painted black mufflers guarantee performance and produce a distinctive power tone. Complete installation flexibility is built in with the full 360° rotation feature on both inlet and outlet pipes. Includes mounting hardware.

Not legal for sale or use in California on pollution controlled motor vehicles.

Prop 65 Warning WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
CARB Warning California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Steel
Sold in Quantity
Pair
Finish
Chrome
Notes
Heat shields are 46.00" long. Kickout and inlet are adjustable for the angle.
Hardware Included
Yes
Bracket Included
Yes
Tube O.D.
3.00
Overall Length
60
MFG. Part #
H1060
Inlet Diameter
2.00
Outlet Diameter
3.00
Reviews

great fit and look

Rated
Product Rating
by richie on July 02, 2018

Summary: perfect fit

Yes, I recommend this product.

Side pipes

Rated
Product Rating
by Papa T on February 06, 2018

Summary: Thanks, pretty nice exhaust set up, however a few scratches were in the chrome of the elbows, to expensive to ship back, oh well it is what it is. Not a deal breaker will do business with Speedway motors again.

Yes, I recommend this product.

Side pipes

Rated
Product Rating
by oldco43 on December 26, 2017

Summary: These are fantastic.Now I can remove the garbage the previous owner mounted too close to the gas tank!!!

Yes, I recommend this product.

I "WOULD" buy this product again'

Rated
Product Rating
by Butch on December 06, 2017

Summary: Looks good, seems well built, fairly easy to install and adjustable to fit. Nice stuff.

Yes, I recommend this product.

My husband loves those side pipes. His car looks GREAT!

Rated
Product Rating
by caz on October 05, 2017

Summary: The 47 ford custom sedan looks awesome with the side pipes. His buddies can't believe how nice they look!

Yes, I recommend this product.

Related Items / Suggested Parts
Shipping

Combined Shipping:

  • Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.

Freight Shipping:

  • Some products are too large for standard ground delivery and must be shipped via truck freight.
  • Please contact us via eBay Message for a freight shipping estimate.
  • When possible, please provide a business or commercial address for delivery to eliminate additional fees.
  • Please ensure the phone number provided is accurate to avoid delays.
  • Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 68 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.

Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.

All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
  • Accepted Payment Methods - PayPal and major credit cards are accepted.
  • Terms - Immediate payment is required on all listings.
  • To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.