Hobbywing EZrun Brushless Sensorless 18A-SL-H (Version 2.0 USB Supported) +12T Motor (KV 7800)+Programcard Combo Set

This Hobbywing Ezrun combo set (Combo-A1) is same as the Hobbywing Ezrun combo (Combo 15-car) plus new features, please scroll down the description for full details

Motor Description:

  • This is the EZrun Brushless Sensorless 18A-SL-H (Version 2.0 USB Supported) +12T Motor (KV 7800)+Programcard Combo Set for RC cars and trucks.
  • Design: Sensorless-Based
  • Operated with: Brushless ESC
  • Size: Similar to Brush Motor 130
  • Diameter: 30 x 20.5 x 20.5 mm
  • Fixed Motor Screw Hole: Hole A Length: 16mm, Hole B Length: 14mm, Hole C Length: 12.5mm
  • Rotor for Gear: 1.98 mm
  • KV: 7800

    • ESC Description:

  • The EZrun series brushless controls (Version 2.0) include ESC of 18A, 25A and 35A for RC cars and trucks.
  • With 3 running modes: Racing mode (Forward), Forward/Backward mode and NEW Rock Crawler mode.
  • Especially designed for RC car, with excellent start-up, acceleration and linearity features
  • Compatible with sensorless brushless motor
  • Use top quality of electronic components to enhance the current endurance and capacity of the ESC.
  • 4 steps of maximum reverse force adjustment
  • Proportional ABS brake function with 4 steps of 4th – 11th maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
  • 9 start modes (Also called “Punch”) from “soft” to “very aggressive”.
  • Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
  • 8 steps of timing adjustment.
  • Waterproof and dustproof.
  • Easily program with only one button and compatible with pocket-sized program card.
  • Dustproof design for the motor.
  • Motor uses top quality materials: ---Aluminium shell (case) ---High quality magnets ---Copper wires of high temperature endurance ---Good quality bearings.
  • Burst Current: 50A
  • Resistance: 0.01 ohm
  • Suitable Car: 1/18, 1/16 car
  • Suitable Brushless Motor: > 12T (2030 brushless motor)
  • Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po
  • BEC Output: 6V/1A
  • Motor Type: Sensorless Brushless Motor
  • Dimension: 31.5 x 27.5 x 15 (mm)
  • Weight: 19g (Without wires)
  • 12T Senserless Brushless Motor (1 Pc)
  • Program card (1 Pc)
  • Cable Tide (2 Pcs)
  • Shrink Tube (3 Pcs)
  • Hobby Wing Decal (1 Pc)
  • Instruction

    • Feature:
  • For: 1:18 RC
  • The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).(NEW)
    • Specification:
  • Turns: 12 T
  • Cont. Current: 18A
    • Include:
  • EZrun-18A-SL-H (Version 2.0) (1 Pc)

    • Combined Shipping Discount is Available!

    Enjoy large savings on shipping when you purchase more than one item from us! Save up to 70% off on shipping when you purchase multiple items at once.

    1st S/H -- 2nd S/H
    US$ 5.99 - $ 1.89
    US$ 6.99 - $ 2.99
    US$ 8.99 - $ 5.99
    US$13.99 - $11.99
    US$21.99 - $19.99