How to change the lens on the sony camera model as100v and as200v x1000v, there is an easier way.
All you need to do is pry off the front black bezel ring and then heat up the lens and thread it right out using pliers like we have pictured.
We can change it for you if you want us to also or sell the cameras ready to go with lens installed and focused.
BLOWING AWAY THE COMPETITION
WE HAVE A REAL STORE FRONT WHERE YOU CAN SEE ALL OF OUR PRODUCTS IF YOU ARE CLOSE BY
228 EAST DIVISION,
SPARTA MI 49345.
This deal is for
1- Ultra high quality rectilinear 4mm flat lens 10mp (Works with FDR-X1000v, HDR-AZ1, AS50, AS100V, & AS200V
Also available in night vision IR mode, just ask.
1-tooth pick
2- lens caps top and bottom for the stock lens
1- foam dust ring/gap filler
1- cue tip for cleaning the lenses & sensor if needed (use windex for the lenses or the sensor if needed & air dust the sensor if you notice any debris on it from interchanging lenses all the time.
The 4mm also allows all the sony action cameras to fit back in the waterproof case & still allows all the buttons to functions unlike our 5.4mm flat lens that sticks out a little too far for that case fit.
This lens is fully backed by our no hassle return policy if your not happy with the quality of this gem.
We will also pay your return shipping if you dont think this lens is of highest quality matched with your camera.
PLEASE NOTE:
YOU MUST REMOVE YOUR STOCK LENS FOR THIS TO WORK.
ALSO YOU MUST THREAD THE LENS IN BY HAND AT FIRST THEN USE PLIERS AROUND THE LENS TOP TO GET IT TO FOCUS, & THREAD IN DEEP ENOUGH AS IT FITS A LITTLE TIGHT IN THE THREADS.
WE HAVE ADDED SOME SILICONE GREASE TO THE THREADS FOR LUBRICATION IN HELPING THE LENS GO IN EASIER & ALSO SOME EXTRA SILICONE GREASE FOR YOU TO APPLY TO THE SONY LENS HOLDER THREADS WITH A TOOTH PICK.
YOU ALSO GET A TOP AND BOTTOM LENS CAP FOR YOUR STOCK LENS FOR STORAGE
If you require a less narrow or even wider angle lens we also have those available, just ask.
ALSO INCLUDES A FOAM GASKET GAP FILLER DUST RING THAT DRESSES THE LENS AFTER YOU HAVE FOCUSED YOUR CAMERA USING THE HDMI LIVE VIDEO OUT FEED OR A IPAD OR SMART PHONE, BUT LIVE HDMI OUT FEED IS THE BEST, BUT HDMI OUT IS NOT AVAILABLE ON THE HDR-AZ1 IS ALL.
EASY INSTALL:
THEN THREAD IN THE NEW LENS WHILE FOCUSING OUT TO AN OBJECT 200FT AWAY OR WHERE YOU NEED TO BE FOCUSED.
CHANGING LENSES & MATING A LENS TO A CAMERA
This information below works on all action cameras that use thread in lenses.
We
offer super fish eye lenses from 1.19mm, 1.4mm, 2.5mm & also
interchangeable 4mm, 5.4mm & 7.2mm highest quality flat lenses.
We
also have great quality 8,12,16,25mm and 50mm fixed zoom lenses & we can
pre-focus them to infinity on your camera or a camera bought directly
from us at the time of purchase by putting a dot at 12:00 on the lens so
you can easily thread in & out & dial in the focus on the lenses easily without having to guess if your in
perfect focus out in the Field.
Simply confirm focus by using a small lcd monitor, or you can use the wifi app on your phone or tablet to confirm focus & aim the camera.