Novak brand 2S-6S Activ8 V2 brushless Electronic Speed Control and the HD8 1/8 scale 1900Kv brushless Buggy Motor from Novak.

FEATURES:
ESC- Ideal for 1/8 scale buggy and truggy racing and bashing, and can also be used in 4WD short course trucks, monster trucks and other high- powered applications that use up to a 6S LiPo battery Auto-detect LiPo battery protection High-voltage programmable and adjustable BEC (10 steps, 6.0-7.2V) Dual level shock system for superior vibration protection Pure sensor-based design 5 customizable throttle profiles can be saved Large 1.6 x 1.6 (40 x 40mm) cooling fan Full coverage heat sink Compatible with the Novak Pit Wizard Plus Programming Box, NOVM4100 Super Tuner Plus programming with 5 multi-colored LEDs On-board temperature monitoring with thermal overload protection Motor sensor test Built-in power cap bank Replaceable high-current input and switch harness One-touch setup Programming features include; 10 Step Drag Brake, Brake Minimum, Brake Frequency, Brake Power, Drive Frequency, Drive Minimum 5 step dead band Dynamic Timing Level (0-45 deg** in 1 deg increments) Battery voltage and transmitter monitoring Motor rotation direction RPM Start/Final (10 steps each with 6 RPM range tables) Trans/Receiver Rate (SSR Mode, Standard) ESC Temperature Runtime Data* *Requires Pit Wizard Plus Programming Box **Timing is limited in 3S-4S operation; timing is not available in 5S or 6S modes, or when using reverse motor rotation Motor- Compatible with all popular 1/8 scale buggies and other high power applications such as the Axial Yeti, Traxxas E-Maxx, Summit and E-Revo Meets ROAR 1/8 scale standards Sensor based design, sensored and sensorless operation Fast switching, high-temperature sensors Wrapped and balanced rotor Epoxy-dipped 12-slot stator CNC machined 6061-T6 billet aluminum ribbed heat sink can Rebuildable Replaceable, heavy-duty, insulated, double-ended sensor harness Solderless timing assembly Multiple bolt patterns

YOU WILL RECEIVE:
Novak 2S-6S Activ8 V2 brushless ESC with Heat Sink, Cooling Fan, Motor Wires and Instructions, HD8 1/8 scale 1900Kv brushless Motor

SPECIFICATIONS:
ESC- Motor Compatibility: 2, 4 and 6 pole sensored brushless Fwd/Brk/Rev: Forward/Brake/Reverse (OFF/ON) Cell Type*: 2-6S LiPo/4-18 NiMh DIMENSIONS: 2.2 x 2.4 (54 x 61mm) height: 1.2 (31mm) without fan 1.7: (44mm) with fan installed Weight: 3.2oz (90.7g) without wires On Resistance: 0.00040 ohms @ 25C trans. temperature Battery Eliminator Circuitry (BEC): 6.0-7.2V DC adjustable/7A peak Motor Limit: 2S- Multi-Pole: 5000Kv or lower; 550-size: 4.5-turn or higher 3S- Multi-Pole: 4000Kv or lower; 550-size: 6.5-turn or higher 4S- Multi-Pole: 3000kV or lower; 550-size: Not recommended 5S- Multi-Pole: 2000kV or lower; 550-size: Not recommended 6S- Multi-Pole: 1700kV or lower; 550-size: Not recommended Wire Gauge: 12G Super-Flex Copper-Strand Silicone Insulated Status LEDs: 5 multi-colored Motor- diameter: 1.57 (40mm) length: 2.80 (71mm) Design: Sensor based Magnet: 4-pole Stator: 12-slot Kv Unloaded: 1900 RPM/Volt Weight: 11.8oz (334.5g) Max Voltage: 4S LiPo* / 14.8V NiMh Shaft diameter: 0.196 (5mm) Shaft length: 0.75 (19mm) *LiPo recommended for performance setups and when using Dynamic Timing Advance jxs 02/10/15 jxs 02/10/15