APDS-9930 APD S9960 RGB and Gesture Sensor Module I2C IIC Breakout for Arduino
APDS-9930 Red

Features
ALS, IR LED and Proximity Detector in an Optical Module
Ambient Light Sensing (ALS)
Approximates Human Eye Response
Programmable Interrupt Function with Upper and Lower Threshold
Up to 16-Bit Resolution
High Sensitivity Operates Behind Darkened Glass
Low Lux Performance at 0.01 lux
Proximity Detection
Fully Calibrated to 100 mm Detection
Integrated IR LED and Synchronous LED Driver
Eliminates ?Factory Calibration? of Prox
Programmable Wait Timer
Wait State Power ? 90 ?A Typical
Programmable from 2.7 ms to > 8 sec
I2C Interface Compatible
Up to 400 kHz (I2C Fast-Mode)
Dedicated Interrupt Pin
Sleep Mode Power - 2.2 ?A Typical
Applications:
Cell Phone Backlight Dimming
Cell Phone Touch-screen Disable
Notebook/Monitor Security
Automatic Speakerphone Enable
Automatic Menu Pop-up
Digital Camera Eye Sensor
Package Included:1 x   Sensor APDS-9930 RGB Gesture
100% brand new and high quality
Material: Electrical components
Color: See pictures
Description: This is the CJMCU RGB and Gesture Sensor, a small breakout board with a built in CJMCU-9960 sensor
that offers ambient light and color measuring, proximity detection, and touchless gesture sensing.
With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more
with a simple swipe of your hand! This is, in fact, the same sensor that the Samsung Galaxy S5 uses and is
probably one of the best gesture sensors on the market for the price.
The CJMCU-9960 is a serious little piece of hardware with built in UV and IR blocking filters, four separate diodes sensitive
to different directions, and an I2C compatible interface. For your convenience we have broken out the following pins:
VL (optional power to IR LED), GND (Ground), VCC (power to CJMCU-9960 sensor), SDA (I2C data), SCL (I2C clock),
and INT (interrupt). Each CJMCU-9960 also has a detection range of 4 to 8 inches (10 to 20 cm).
Size: See the picture
No retail package
Note: Due to the difference between different monitors, the picture may not reflect  the actual color of the item. Thank you!!
Package includes:1Pc x RGB Proximity Sensor Detection Direction Gesture APDS-9960 Non-Contact Module
GY-9960LLC APDS9960
This is the SparkFun RGB and Gesture Sensor, a small breakout board that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand!
For your convenience we have broken out the following pins:
VIN (),
GND (Ground),
SCL (I2C clock),  
SDA (I2C data),
INT(interrupt).
Package Included:1 X GY-9960LLC APDS-9960 Gesture Sensor Breakout
APDS-9930 Purple
ALS, IR LED and Proximity Detector in an Optical Module
Ambient Light Sensing (ALS)
Approximates Human Eye Response
Programmable Interrupt Function with Upper and Lower Threshold
Up to 16-Bit Resolution
High Sensitivity Operates Behind Darkened Glass
Low Lux Performance at 0.01 lux
Proximity Detection
Fully Calibrated to 100 mm Detection
Integrated IR LED and Synchronous LED Driver
Eliminates ?Factory Calibration? of Prox
Programmable Wait Timer
Wait State Power ? 90 ?A Typical
Programmable from 2.7 ms to > 8 sec
I2C Interface Compatible
Up to 400 kHz (I2C Fast-Mode)
Dedicated Interrupt Pin
Sleep Mode Power - 2.2 ?A Typical
Applications:
Cell Phone Backlight Dimming
Cell Phone Touch-screen Disable
Notebook/Monitor Security
Automatic Speakerphone Enable
Automatic Menu Pop-up
Digital Camera Eye Sensor
Package included: 1*APDS-9930 Proximity Sensor Approaching and Non Contact Proximity Module CKIN

EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

  • If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
    We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques