GO POWER  from Mini-Auto.  KTM Motors are new improved motors from Mini-Auto California.


For this listing we offer one (1) 1960's Slot Racer Special Hi-Speed, Hi-Torque KTM Kemtron Mini Auto Motor In-Line Motor, Part # DH13A 12 Volt.  New Old Stock with original factory box.


All KTM  Mini Auto DH 13A Motors are shorter than most in-line motors, and feature 5 pole design.

This Great Motor will furnish reliable power under light loads for extended periods.

Features:  Armco Iron Pole Pieces,  Rust proofed,  with Alnico #5 Magnets.  Five Pole (slot) Armature  0.092" is ground to diameter of 17/32".  Commutator is ground true After assembly.  Self-aligning oil impregnated bronze front and rear armature bearing.   Brush tips are copper graphite and brushes are very easily replaced.   Offers 1 threaded mounting hole, on bottom with 1 mounting screw included.  Standard windings for 12 Volt D. C. 32,000 RPM.

This motor was renown for great smooth power in a very compact package. Very impressive technology for the time
DH-13 A  Motors come with windings for 12 volts DC,  Feature bronze oilite front & rear armature bearings.

These in-line motors can be used in Strombecker, Revell, Classic, Eldon, Monogram and similar chassis.


Mini Auto same as Pittman 195, Pitman DC62B, Aristo Wildcat and other similar in-line style motors.


Specs: 12 Volts,  5 Pole Armature Permanent Magnet   


DH-13 A Features:  Pittman Style Motor Brush assembly.  Motor lays flat and mounts on its side and has 1 mounting bolt threaded mounting hole on opposite side of the motor from the brushes side for easy mounting set-ups.  Motors come with windings for 12 volts DC,  Feature bronze oilite front & rear armature bearings

KTM  Kemtron Mini Auto Motors.

INFO:  

DH13, DH 13A & DH 13M with Axle Bracket, same as Pittman 195, Pittman DC62B,  Aristo Wildcat  and other similar in-line style motors.

KTM offered other voltages from 3 up to 18, see the ones we have in my Store 

Measurements (size):  1/2" X 3/4" X 1 5/8".

Armature Shaft size:  2.3mm (0.093") 3/32" Diameter Motor Shaft with NO Tooth Pinion.

Perfect for all 1/32nd, 1/24th 1/25th scale cars.


Check out our Store for more motors and accessories.

My Dad owned a Hobby Shop that closed in the early 1970's, and he kept some of the more interesting slot cars and accessories from that era.  The items I am listing are in most cases, near new or gently used.  I have taken many pictures to show every angle and have tried to describe all features and/or flaws to the best of my ability.  Please email with any questions specific to something I may have missed. Please check my other listings as I will be selling many cars, accessories and track in all three scales-- HO, 1/32nd, and 1/24th.  If you don't see the car or part you are looking for, please email me.  If I have it, I will list it for you.  Many of the items in my inventory  are  NEW OLD STOCK.

These items come from a non-smoking environment.


Please look carefully at the pictures. We do our best to accurately describe each item, condition of the item and any defects.

 What you see in the picture is what you are bidding on.   "SOLD AS IS, AS PICTURED"

 If you have any questions regarding shipping or the item, please email us BEFORE you bid or buy.

 The Shipping/Handling Fee, includes our cost for packaging materials, postage and Delivery Confirmation, but NOT insurance.

 Fees shown are for USA Delivery ONLY. All Payments must be through PAYPAL.

 **FOREIGN BUYERS  please email for correct shipping fees BEFORE PAYING FOR YOUR ITEMS**  

PLEASE NOTE:  If we over-estimate the shipping fee we always refund the overage back to you.

 Thanks for looking and Happy Shopping!