POR15 Top Coat Glossy Black Paint (BlackCote) US Quart (946ml)

POR15 Top Coat Gloss Black (was BlackCote) is a direct to metal coating designed to work incredibly well in all applications where there is a need to preserve substrates susceptible to corrosion.

Under exposure to sunlight and weather POR-15 TopCoat Glossy Black (was Black Cote) has exceptional long term gloss and colour retention

POR15 Top Coat can be applied directly to metal substrates, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long lasting protection.

POR-15 Top Coat has excellent adhesion and when used over POR15 Rust Preventive Paint the products create a system works to provide a permanent barrier to corrosion.

Amazing scratch and abrasion resistance
Not sensitive to UV light
Can be applied over POR-15 or other paints.

DIRECTION

Stir contents well, then dispense a portion into a separate container and seal can at once, keeping lid and grooves clean to avoid permanently sealing can shut.

Do not paint directly out of can. Like all POR-15 coatings, this should always be stirred, never shaken.

Best Dispensing Method: Use coffee scoop or pouring spout.

Do not put left-over paint back into can. Thin only with POR-15 Solvent, if necessary. Apply in thin, covering coats.

SURFACE PREPARATION

Surface to be coated should be dry and free of grease, oil, and other contaminants. Use POR15 Cleaner Degreaser (Marine Clean), diluted 1 part Cleaner Degreaser to 8 parts water to remove light contamination. Then rinse with water and allow to dry.

APPLYING CHASSISCOAT OVER OTHER PRIMERS

Repeat instructions above, then sand surface lightly with 240 grit sandpaper and wipe clean with dry tack cloth and paint

TO PAINT OVER A CURED POR-15 SURFACE

Clean with Cleaner Degreaser as above, then sand with 300 grit sandpaper and apply one light to medium coat of POR-15 Self-Etching Primer.

Allow to cure for 30 Minutes at 68ºF (20ºC), or longer in cooler temperatures. Apply POR15 Top Coat as final finish. Depending on temperatures and humidity recoat at 3-12 hour intervals.

Spray Application: POR-15 Topcoat will need thinning using POR15 Solvent for most spray application 10-20%. Use 25-35 lbs.(172-240Kpa) pressure for normal semi-gloss.

Cleanup: Use POR-15 Solvent or lacquer thinner for cleanup, which must be done before the top coat dries; once dry it cannot be removed by solvent. POR15 Top Coat can take 3-4 days to reach maximum hardness or longer in temperatures below 55ºF 15ºC.


POR15 Top Coat Glossy Black Paint (BlackCote) US Quart (946ml)

The Restoration Destination

Frost Restoration is a unique business where you can find everything you need for your Classic or Custom car, motorbike, caravan, trailer or truck. From Rust Treatments and Paints to Specialist Mechanical and Bodywork Tools, Frost Restoration is the UK's premier Restoration Destination!

Company History

Frost Ltd was established in 1905 in Rochdale, Lancashire, as a general Engineering company but soon becoming specialists in Sheet Metal Working Machinery. Mr Frost died in 1948 and the company was bought by the Wood family and moved to its Crawford street location in 1948.

In the 1980's, the Company was spending time advising customers where to find various types of restoration equipment, partly because of the continued manufacture of the wheeling machine (English Wheel) and partly due to Mike Wood's contacts from racing Classic Cars. Mike then had an idea to put his knowledge of car restoration into a little sales booklet and so Frost Restoration was born.

We offer an outstanding range of brands some of which are exclusive to Frost UK such as POR 15 (Paint, Rust Treatment, Tank Sealer), Eastwood (Paint, Automotive Tools), Evaporust and Dinitrol (Rust Treatment) as well as hard to find tools which are not available from major retailers. We have also launched our own FROST branded products, offering a premium quality at a bargain price.

In 2016, due to the rapid expansion of the business and the need for greater stock holding and improved logistics, we relocated to a purpose built 50,000 sq ft facility between Manchester and Warrington, Cheshire.

Our local shop is based in Glazebury, Cheshire just off the A580 East Lancashire road. Our opening hours are Monday to Friday 08:30 to 16:00. We pride ourselves on being knowledgeable about the products we sell and are always happy to offer advice over the phone.

Delivery & Dispatch

UK DELIVERIES: Most items are held in stock and if paid for before 3.30pm Monday - Friday, will be dispatched same day and usually delivered within 2-3 working days (Saturday is NOT counted as a working day). However, please be aware that certain items are held for us by our suppliers and so these items will take approximately 4-6 working days to be delivered. Please make sure you check the estimated delivery date within the listing. Most items in our ebay store offer FREE ECONOMY UK MAINLAND DELIVERY . PLEASE NOTE: We are advised by Royal Mail that items sent 1st or 2nd class post can take up to a maximum of 14 working days to be delivered, please allow 14 working days for delivery before raising a claim with us.


LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. We try to ensure that our listings are accurate and will not give anyone outside mainland UK the option to purchase these items, but occasionally our listings do allow this to happen. Please be aware that if you purchase a liquid or pressurised item and are anywhere outside mainland UK, we will not be able to fulfil your order and will contact you to advise you as soon as possible.

 

Returns & Exchange

Goods which prove unsuitable may be returned for refund, credit or exchange if they are returned to us within 7 days of receipt. Subject to the following conditions:

•       Items are returned carriage paid.
•       Items are received in a resalable condition.
•       Items should be returned unused in their original condition in order to secure a refund.
•       Items are returned complete with all packaging in good condition. (We reserve the right to levy a charge to replace product packaging which is damaged or defaced).
•       Items returned after 7 days from receipt may be subject to a restocking charge of not less than 10%. This does not affect your statutory rights.
•       We cannot accept any items which have been specially ordered for you or manufactured to your specification for return.
•       All returns are to be accompanied by the senders name and address, account number, order reference number (these are found on the invoice), and reason for return. Please help us to help you.
•       We cannot accept responsibility for returned parcels which are undelivered, please retain your proof of postage etc., you may require it on the event of a claim with your carrier.

You must obtain a Returns Authorisation Number before returning any goods. Please contact us for this.

Frost is not responsible for any labour charges incurred during fitment or removal of allegedly faulty (or incorrectly supplied) parts.

SHORTAGES & DAMAGE - Please advise us of any problems with shortages or carrier damage within 5 days of receipt. We regret that beyond this time, due to circumstances beyond our control we may be unable to process your claim