Metal brake line replacement kit GM 1980 thru 1993 FWD.-replace rusted lines!!!!

https://www.oldtimeparts.com/oldtimesmall2.gif

 

for your FWD (front wheel drive) car
total of 20 lines and couplers!

https://www.oldtimeparts.com/Eve_20kit.jpg

for front wheel drive cars, see other auctions
for rear wheel drive.

includes special lengths
 for your GM Car!
(no need to buy a flaring tool!)

Buy for the future brake job!!!

This kit will do the entire car from the proportioning valve to the wheels.
The lines to the master cylinder may need special nuts in a few cases that are not supplied in this kit. 

https://www.oldtimeparts.com/line_bubble.jpg 

This is is a TrueBend metal brake line replacement kit. All lines are supplied double-flared at each end with the special bubble flare for your car. These malleable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid.  Four couplers are included to join lines where necessary. Instructions are also included.
https://www.oldtimeparts.com/brake_lkit.gif

Will not fit any ABS Modules.
The average Gm takes 21 feet of brake line to do system to the wheels,
 this kit has 40 feet of lines to fit all the various configurations.
Use the extra lines for another project or up to the master cylinder!



                                                                                          this kit is for the following:

 

Buick

Century 1982 to 1993 
Regal 1988 to 1993  F. W. D
Roadmaster 1991 to 1993 (see note #1 below)
Skyhawk 1982 to 1989
Somerset, Somerset Regal 1985 to 1993
Skylark, Special Grand Sport, sportwagon 1980 to 1985

 Cadillac

Allante 1987 to 1993
Cimarron 1982 to 1988
Eldorado 1986 to 1992
Seville 1986 to 1993

Chevrolet

Beretta 1987 to 1993
Cavalier 1982 to 1993
Celebrity 1982 to 1990
Citation 1980 to 1985
Corsica 1987 to 1993
Lumina 1990 to 1993

Oldsmobile

88,98 Delta, Regency 1985 to 1993 F. W. D
Achieva, Cutlass Calais 1985 to 1993
Cutlass Ciera, Cutlass Cruiser 1982 to 1993 F. W. D.
Cutlass Salon, Vista 1988 to 1993 F. W. D.
Firenza 1982 to 1988
Omega 1980 to 1984
Toranado 1986 to 1992

Pontiac

Bonneville, Catalina, Grandville, Executive 1987 to 1993
Grand Am 1985 to 1993
Grand Prix 1988 to 1993
LeMans GTO Grand Am 1988 to 1993
Phoenix, Ventura 1980 to 1984
Sunbird, J2000 1982 to 1993

 

Here is a list of what lines are included to do the models above, unions are to make the longer length lines, instructions are included.

  • 1x 6"   Line
  • 1x 8"   Line
  • 1x 12" Line
  • 1x 16" Line
  • 1x 20" Line
  • 1x 23" Line
  • 1x 27" Line
  • 1x 30" Line
  • 1x 33" Line
  • 1x 37" Line
  • 2x 40" Line
  • 1x 43" Line
  • 1x 47" Line
  • 1x 51" Line
  • 1x 60" Line
  • 4x Unions  

https://www.oldtimeparts.com/line_ez.jpg

https://www.oldtimeparts.com/line_copper.jpg

https://www.oldtimeparts.com/trubend.gif

Our TrueBend® brake lines resist corrosion, vibration, fatigue and shock from impact. They are coated for corrosion protection in compliance with GM132M-ASV and SAE J527B.  Each line is manufactured by double wrapping a copper coated steel strip to form a double wall tube.  Then, the tube is furnace brazed to fuse the copper/steel tube into one continuous and seamless tube.  The tube is then given a outer coat for corrosion and abrasion resistance. These lines are the strongest and safest avai; yet can still be easily bent without kinking or without damaging the  outer coat.
 

  • Note # 1 ,  These cars  may need s 10x1 to 12x1 MM adapter in the rear
  • This kit contains all the lines to do a wide variety of GM cars, and many different configurations, so you will have unused lines in any installation. These extra lines are a bonus that can be used for other projects
  • The tubing is double walled, seamless and copper fused with a special inner and outer coating to provide protection from abrasion and corrosion. This is the same tubing that is used on new cars!
  • The lines are supplied straight.  If you need a very sharp bend next to the flare at the end of the line, you will need a bender listed under "tools/supplies" on our Ebay store.
  • All unions are solid brass to stop rust.
  • All lines are made in USA or Canada and are the stock 3/16" outer diameter with a factory flare.
  • fits s the years: 1980 81 1981 82 1982 83 1983 84 1984 85 1985 86 1986 87 1987 88 1988 89 1989 90 1990 91 1991 92 1992 93 1993









    • https://www.oldtimeparts.com/central_ship.gif

     

    In any correspondance please be specific and include our ebay # EE27299 

     

    Powered by SixBit
    Powered by SixBit's eCommerce Solution