YOU ARE ORDERING A BALL (ONLY) KIT
 to conduct
A PERMANENT
 
REPAIR / UPGRADE
 
 TO A KRUPS COFFEE MACHINE WATER PUMP
MOST KRUPS MACHINES ARE FITTED WITH A DEFONT PHOENIX-50 SOLENOID TYPE WATER PUMP (THE ULKA EX7, EX7GW AND THE EP7 WATER PUMPS ARE SIMILAR(ALL 3 OF THEM ARE SIMILAR HIGHER CAPACITY PUMPS) AND USE THE exact SAME BALL))
 
1 x polished PYREX / mineral / glass
sphere / ball valve (ONLY)
 
IF YOUR MACHINE SOUNDS LIKE IT'S PUMPING BUT IT'S NOT, YOU DON'T NEED A REPLACEMENT PUMP (WHICH WILL GO THE SAME WAY AFTER A 500+ MORE CUPS), YOU JUST NEED TO REPLACE THE BALL.
 
THIS REPLACEMENT BALL IS COMPATIBLE WITH ANY KRUPS MACHINE WHICH USES THE HIGHER CAPACITY
WATER PUMP DESCRIBED ABOVE
 
IF YOUR MACHINE SOUNDS LIKE IT'S PUMPING BUT IT'S NOT, YOU DON'T NEED A REPLACEMENT PUMP (WHICH WILL GO THE SAME WAY AFTER A 500+ MORE CUPS), YOU JUST NEED TO REPLACE THE BALL SEAL / VALVE.
 
PLEASE NOTE
 IF YOUR COFFEE MACHINE PUMP SOUNDS LIKE IT IS WORKING BUT HAS A POOR OR INTERMITTENT OR NO FLOW, THE MOST LIKELY PROBLEM IS THIS BALL VALVE.
 
THE  PUMP IS DESIGNED TO EVENTUALLY FAIL AS IT HAS BEEN MANUFACTURED WITH  EITHER A PLASTIC (DELRIN) OR STEEL BALL (INSIDE) WHICH IMMEDIATELY STARTS TO WEAR DOWN / CORRODE WITH USE UNTIL IT IS TOO SMALL TO CLOSE THE SEAL
 
THIS IS A SCIENCE LABORATORY QUALITY MINERAL (pyrex GLASS) SPHERE WHICH WILL NOT WEAR AWAY WITH USE AND WILL PROBABLY OUTLAST THE COFFEE MACHINE. WE HAVE THESE IMPORTED FROM A SCIENCE LABORATORY EQUIPMENT SUPPLIER IN SPAIN AND THEY ARE INFINITELY SUPERIOR TO THE PLASTIC OR STEEL BEADS WHICH HAVE WORN AWAY IN YOUR COFFEE MACHINE PUMP.
 

THE COFFEE MACHINE MANUFACTURER ULTIMATELY WANTS YOU TO either:

  • RETURN THE MACHINE TO A SERVICE CENTRE (WHO WILL SIMPLY REPLACE THE PUMP WITH ANOTHER WHICH WILL DEVELOP THE SAME PROBLEM)

OR

  • GIVE UP ON IT and BUY A NEW MACHINE.

YOU DON'T NEED TO DO either, IT'S A REALLY SIMPLE DIY REPAIR WHICH WILL MAKE YOU A LITTLE BIT RICHER IN ACTUAL TERMS, BODY AND SOUL.

This is a repair kit which addresses the problem permanently is better than a new pump as there will be no more micro-plastics in your coffees and it will pump more effectively / efficiently.

THIS KIT INCLUDES:

  1. 1 x PRECISION MADE PYREX GLASS / CRYSTAL BALL / MINERAL SPHERE ONLY

So this is MUCH BETTER THAN A NEW PUMP OR A LIKE FOR LIKE REPAIR, this listing is for a "ONCE ONLY - FIXED FOR GOOD" repair.

This is an upgrade to a pumping system that will work without valve wear.

You can do this! PLEASE LOOK AT ALL THE PICTURES AS THEY ARE THERE TO GUIDE YOU. (THE PICTURES ARE OF THE SMALLER CAPACITY EP5 PUMP BUT THE JOB IS PRETTY MUCH IDENTICAL)

With basic DIY skills, fitting this new valve is EASY.

 
  1. In most cases, it is advisable to firstly remove the pump from the coffee machine (this is not always necessary, as in some machines, one can access the pump assembly without removing it from the machine)
  2. Remove 2 screws holding the pump to the metal solenoid chassis
  3. Dismantle the pump as in the supporting photos
  4. Replace the plastic ball with the new glass sphere
  5. Re-assemble pump (pay attention to the photos to make sure it is re-assembled properly)
  6. Replace pump into coffee machine
  7. JOB DONE.
Happy customer message:
 
thank you friend, I received the repair kit to fix my machine and I did everything as and it worked, thanks again for everything you returned part of the happiness of my girl lol

 

*******************

 

FOR MORE BARGAINS AND INTERESTING ITEMS, PLEASE VISIT OUR STORE FOR A BROWSE AROUND:

 LOVELIFE3BAY  

 

Heart-with shadow

3L

Lovelife3BAY sell quality home improvement products electrical fuses lighting DIY Motorcycle seat cover repair kits architectural furniture lock window door handle hinges brackets brass chrome finishes mesh aluminium upvc pvc insect screen buttons toe-socks plastic electronic plug adapters and fishing tackle.

For multiple purchases, a COMBINED POSTAGE INVOICE should be sent automatically.

 

If you are happy with the invoice please feel free to proceed with payment. If it doesn't happen automatically or there is ANY issue with the automatic invoice, PLEASE WAIT to receive an invoice or contact us BEFORE you make payment.

 

There are always ways of improving the service quality, and we endeavour to continually improve, so please feel free to tell us how we can. Thank you for your time to read this.

 

Our shipping charge includes:

 

·        collection service to ensure post is collected virtually EVERY working day

·       packaging materials

·       postage/ delivery/ courier

 

*******************