Product Overview

3D Printer Kit RAMPS + LCD Controller + MEGA 2560 R3 + A4988 Driver + Endstop

Detail 

1.Mega 2560 control board CH340G version:The Mega 2560 is an update for the Arduino Mega, which it replaces.
The board is a microcontroller board based on the ATmega2560-16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Product Summary:
CH340G replace the Atmega 8U2/16U2
CH340G Driver Download link, please copy the link and paste in browser: http://www.5v.ru/ch340g.htm
Microcontroller:ATmega2560
Clock Speed:16 MHz
EEPROM:4 KB
SRAM:8 KB
Flash Memory:256 KB of which 8 KB used by bootloader
Operating Voltage:5V
Input Voltage (recommended):7-12V
Analog Input Pins:16
Digital I/O Pins:54 (of which 14 provide PWM output)
DC Current for 3.3V Pin:50 mA
DC Current per I/O Pin:40 mA
 
2. Mega Pololu Shield Compatible (RAMPS 1.4 Shield)
It is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

3.LCD 2004 with Controller

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 2004LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
 
4. A4988 driver module
A4988 Stepper Motor Driver Board is  a breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
 
* Maximum output current is 2A
* Simple step and direction control interface
* Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
* Adjustable current control lets you set the maximum current output with a potentiometer,which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates
* Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
* Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
* Short-to-ground and shorted-load protection 
5. endstop:
The endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools.

6. SD Ramps

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next 3D printer project! Board comes fully assembled and tested.The bare socket is available. 

Package include:
1 x  RAMPS 1.4
1 x  LCD controller
1 x  MEGA 2560 R3 CH340G version
5 x  A4988 driver
3 x  Endstop with 4pin cable
1 x  SD Ramps
1 x  USB cable
1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.

 

2.We only ship to ebay confirmed address. So before bidding,  please kindly verify your ebay address.

 

3.Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.

Shipping to most other countries takes about 12-30 days via Economy Int'l Airmail.

Less than $40, without free tracking number,if you request tracking number,please send ebay message to us.

Over $40,with tracking number free.The shipping time depends on your location and local postal service,as well as the  weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you not get the package.   

 

4.Express shipping: DHL/FEDEX/EMS,Extra $20 --$25 will be charged for the first 500 grams for most countries. Contact us if  you need this service.

 PayPal payment accepted only.

 

1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.

2. If product is defective or damage upon arrival, or wrong product shipped, please send ebay message to us immediately. Returns accepted within 30 days of delivery date. 

3. Please send ebay message to us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.

DataCaciques