BEFORE YOU BUY , OPEN YOUR TV AND CHECK THE DESIGN AND MPN.
DON'T BUY JUST BY TV MODEL , CAN BE DIFFERENT BOARD.
ITEM DESCRIPTION:
The Power Supply Board is usually the largest and heaviest board found inside the LCD TV. Some repair techs call the “Power Supply Unit” and “Power Supply Module” or just “PSU.” It converts the main AC supply into DC voltages which can be used within the LCD TV by the circuit. The control board is sometimes attached to the inverter board and is known as an I / P board.
Common faults-No power, low power, blink power, and no power intermittent.
Sometimes the Main Board is called as a motherboard, main panel, electronic board, scaler board, A / V board, main module, logic board or even A / D board. The purpose is to capture video and audio signals and convert the analog video signals to digital signals that can be transmitted to the T-con board by the LVDS IC (low voltage differential signaling).
Note: The audio / RF Input / Rear Inputs portion is sometimes isolated from the main board.
Common faults- No monitor, no colour, after often a screen full of vertical lines, no sound, horizontal lines and frame, sometimes the LCD TV fault (usually display problem) may be due to software problem where you need to update the software.
Typically, the inverter boards are located along the edges nearest to the TV panel and are found only in LCD’s. The function of these boards is to convert the low voltage DC supplied by the SMPS to a high AC voltage (500 to 1500 Vrms) to illuminate the back-lights. Such boards can be used either as a single board or as an I / P board.
Common errors-Shutdown after a couple of seconds, Dim screen.
RETURNS:
|