INKBIRD ITC-308 Digital Temperature Controller Wired Thermostat

  • Output voltage: On/off control(heating and cooling)
  • Temperature control range: -50 ~ 120 °C / -58 ~ 248 °F
    Temperature accuracy range: ±1 °C (-50 ~ 70 °C) / ±2 °F (-58 ~ 160 °F).
    Ambient temperature: -35 °C ~ 75 °C / 22 °F ~ 167 °F.
    Storage temperature: -20 °C ~ 60 °C / -4 °F ~ 140 °F
  • NTC Sensor : 2m/6.56ft
    Alarm with overtemperature and sensor malfunction
  • Input voltage: 100 ~ 240 VAC, 50 Hz/60 Hz;
    Connection cable length: 1.5 m (5 ft);
  • Connection cable length: 30 cm (1 ft).
  • Output voltage: MAX10A, 220V, 2200W.
  • Maximum output load: 2200 W (220 V)
  • EU socket: 135 x 54 x 40 mm (5.3 x 2.1 x 1.6 inches).

 

     Set TS = 16 ° C

  • Press the SET button for 3 seconds until "TS" temperature settings appear.
  • Then set the temperature with the decrease button and high button to 16 °C.

     Set HD = 1 ° C.

  • Press the SET button and navigate up to "Hd" with the decreases button
  • And increase to regulate the temperature to 1 °C.

    Set CD = 4 °C.

  • Press the set button and navigate up to "Cd" with the decreases button and increase to adjust the temperature to 4°C,
  • Then press the SET button for 3 seconds to save the settings.
  • TS-HD 16-1=15 (heater goes on ≤ 15 heater goes off at 16)
  • TS + CD 16 + 4 = 20 (cooling starts ≥20 cooling goes off at 16).

What is the ITC-308?

The ITC-308 is more user-friendly, safe and reliable.

| 308 Temperature controller with two relay outputs. It can be used as overtemperature protection and as an automatic temperature control system for different electrical devices.

| It can be easily connected to cooling and heating devices to achieve an ideal temperature control.

Features:

  • Easy to use plug and play design double relay output
  • Can be connected to cooling and heating devices at the same time.
  • Dual display window to display the measured temperature and the set temperature simultaneously.
  • Temperature calibration.
  • Compressor delay protection for the cooling control.
  • Alarms for too high and too low temperatures.
  • Adjustable heating cooling difference function (hysteresis) can be set separately for cooling and heating

PACKAGE CONTENT:

  • | 1x ITC-308 Thermostat
  • | 1x NTC Sensor
  • | 1x English Manual

 

Am 03.04.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques