Rack Shelf Mounted Input/Output panel - AC Mains Power, RJ45, Antenna plus A Big List of Options!
 
NovexComm - 1(310) 534-4456
M-F 10 am-6 pm Pacific Time (west coast)
This Input / Output panel bolts to the back of a rack shelf and is available with several options - the stock version has one IEC (AC Mains) power (with solder terminal pins), one RJ-45 extension cable (microphone or Ethernet), and two dual-female coax connectors (two UHF (SO-239/PL-259) or two Type-N or one of each).

When you order this panel YOU NEED TO SELECT THE COAXIAL CONNECTORS - YOU CAN CHOOSE TWO UHF OR TWO TYPE N BULKHEAD OR ONE OF EACH!  (and let us know which one goes where)

The panel as shown is 1.75 inches / 4.44 cm high X 7.25 inches / 18.4 cm wide and bolts to the rear apron of a rack tray to provide you with those important I/O connections. We supply 8-32 bolts & nuts to mount it, you get to drill the holes in your rack shelf. Or if you order this with a radio rack mount then we will pre-mount it on your rack shelf.

Do you need coax jumper cables to go from the I/O bar to the equipment? We have those for $18 each as an option; please ASK as they don't come with it. They are machine made, low loss and low SWR.  We can provide most anything you can think of... make us prove it!

We can provide a wider version on special order with different or additional connectors on special order... any combination of:

  • Additional UHF / PL259 / SO-239 bulkhead connectors
  • Additional Type N bulkhead connectors
  • Mini-DIN double-female
  • XLR
  • Neutrik
  • DB-9 / DE-9
  • DB-25
  • SMA extensions (work with GPS antennas & stuff like that)
  • RJ-45 / RJ-12 / RJ-14 / RJ-11 extension panel mounted sockets 
  • USB Type A or B panel mount sockets (even USB 3!)
  • Powerwerx apertures (stock is 1.125" round and you can put all kinds of cool stuff in them!)
  • PowerPole connections - we stock several sizes and can get most others
  • Of course ALL of the items listed above are for made-to-your-order custom panels... with custom pricing... and it takes time to acquire some of those connectors... we bet you knew that but we have to say it!
  • We can make a 1U (1.75 inch / 4.44cm), 2U (3.50 inch 8.88 cm), 3U (5.25 inch / 13.32cm ) or 4U (7 inch / 17.76 cm) custom I/O panel for your rack to your specifications, start the process by asking for a quote!

  We also sell portable cases so please ASK for a portable "Go Box" design special built to fit your needs!

Novexcomm makes standard and custom rack mounts for any need and almost any radio.
Use any browser to look up Novexcomm...
We do rack mounts and Go-Boxes your way!
  • EMAIL, TELEPHONE QUESTIONS, AND QUOTE REQUESTS ARE ALWAYS WELCOME.
  • Use any search engine and connect with us, 10 a.m. to 6 p.m., Pacific Time (west coast), just search for NOVEXCOMM or Bob Burchett WB6SLC (good at QRZ). Call us!
  • If you are going to email us please include your name, phone number, and callsign in the body of your email.
  • We can make panels for most anything here at Novexcomm - We have it all and if we don't we can custom make if for YOU! Give us a try!
  • If you have any special needs like portable (Go-Box) or mobile operation be sure to give us a call first to discuss how we can make it work for you.
  • Please see our eBay store for all of our other stock rack mounts.  Don't forget we can custom make a panel for YOU, call us!
  • Our rack panels are made from 0.125 (1/8 inch) aluminum, have a semi-gloss (satin) black baked finish and are made in the USA!
  • Shipping and handling via Ground in the US lower 48 states, other destinations will be quoted upon request. Prices quoted do not include shipping.
  • We combine items when possible to save you shipping money!
  • We offer the eBay Global Shipping Program and ship anywhere. We have customers worldwide.
  • Silly disclaimers we have to say: Any radios, tuners, accessories, etc. shown are not included in this auction.  We can't afford to have a sample of every radio ever made sitting around here just for photos so many of our images are Photoshopped. Some of them aren't even of the right  radio; in some cases we put a photo of a similar radio there just to give you an idea of what our rack panel will look like when you mount your radio into it.