Buy by 3:00 pm cst & item will ship same day M-F thanks
Aeromotive part #17245
This new fuel pump kit part#17245 from Aeromotive is an all-inclusive system for carbureted street cars and can handle up to 600 hp without the need for a seperate fuel-pressure regulator. Internally regulated to 7psi, the billet H.O. fuel pump part #11209 flow 55lb/hr or 90 gph (at 5 psi) with 3/8" NPT inlets and outlets. The kit includes Aeromotive's own fuel filter, braided fuel line, fittings, wiring, relays and terminals.
does not need regulator
Aeromotive H.O. Fuel Pump Kit
This kit contains the following parts:
1 ea p/n 11219 Pump
1 ea p/n 12324 Filter
1 ea p/n 16301 fuel pump wiring kit
1 ea p/n 15605 AN-06 / AN-08 Reducer union
2 ea p/n 15610 AN-08 / AN-010 Reducer union
2 ea AN-08 o-rings
2 ea AN-10 o-rings
16 ft AN-06 stainless steel braided line
4 ft AN-08 stainless steel braided line
2 ea AN-06 straight hose end
1 ea AN-08 straight hose end
1 ea AN-08 90-degree hose end
12 ea tie-wraps
6 ea Cushioned line clamps
6 ea self tapping screws
If you are using a stock fuel tank, install a reservoir style sump in the bottom-rear of your fuel
tank. Exercise extreme caution and follow all manufacturer’s recommendations when
installing a reservoir style sump.
If you choose not to install a reservoir style sump, then you must install a high flow capacity
fuel tank pickup.(Installing a high flow pickup instead of a reservoir style sump may
shorten the fuel pump life and cause driveability problems. Stock fuel tanks have a small
inlet reservoir that is quickly emptied by a high flow fuel system, causing pump starvation
and cavitation. When using a pickup, you should maintain at least ½ tank of fuel in the
vehicle at all times, to avoid emptying the stock inlet reservoir.)
(((((((((((((((COMES WITH 1 YEAR WARRANTY FROM AEROMOTIVE)))))))))))))
CHECK MY FEEDBACK I DELIVER!!!!, BIDDER PAYS $00 S/H, AK, HI, PR, WILL PAY ACTUAL SHIPPING CHARGE